Joe's Pretzel Truck
Now you too can have your own miniature recreation of Joe's Pretzel Truck as it appeared in the first volume of Wings of Fire: Salvation! This set features a detailed model of the pretzel truck with a removable roof and space for a mini dragon inside, a mini Joe figure, and some pretzels and pretzel bites for him to sell! Save and print out the papercraft sheets at the bottom of this page to build this set for yourself!Â
Instructions:
Click here for instructions on how to assemble the mini dragons.
The pretzels and pretzel bites are cut out and glued back-to-back.
Pretzel Truck Assembly:
The pretzel truck is a bit complicated to assemble, so I've provided step-by-step instructions for doing so.
1. Glue the small counter side piece to the spot shown in the photo.
2. Glue the front and back parts of the front side of the truck as shown.
3. Glue the front and back parts of the back side of the truck as shown.
4. Glue the front and back walls to the floor of the truck.
5. Glue the inside right wall piece to the outside right wall piece. It can help to use another part to mark down where it goes.
6. Glue the assembled right wall to the rest of the truck as shown.
7. Glue the outside left wall and counter piece to the rest of the truck, ensuring the counter lines up with the white area on the floor. (This part can be tricky.)
8. Glue the front of the truck to the rest of the truck. Remember to also glue the front wheels to the tabs on the bottom of the right and left walls!
9. Fold and glue the edges of the roof top piece to its back as shown.
10. Glue the assembled roof bottom piece to the roof top piece.
11. Assemble and glue the sign to the top of the roof.
And you're done!
Papercraft Sheets:
Save these and print them out to get started!
