PROJECT 1 REVIT MODELLING AND DOCUMENTATION

Plot out the grid lines.

Create the levels.

Generate floors for level 1.

Generate floors for ground level.

Generate columns and curtain wall.

Create a custom made shaped staircase.

The stairs is generated.

Add railings aloong the walkway.

Create a spiral staircase.

Tab to select the curtain wall panel and change it into glass door.

Create walls along the columns

Add more walls and include doors and window.

Modify the left and right support of the spiral staircase

Edit type to remove the riser and add handrail along the support.

Create new curtain wall type and adjust the distance between mullions

duplicate and modify into new mullion (30mm Timber).

Change the curve wall surface into curtain wall and apply TIMBER STRIP curtain wall

Add half wall and curtainwalls for ground floor.

Create a custom curtain wall panel using wire mesh as material.

Change the materials of the panel.

Create the ceilings.

Create roofs.

Outcome of single direction pitch roof.

Attach the columns and curtain wall to the roof.

Add another roof using the wall footprint.

Load in custom made revit door family.

Load in custom made revit louvre window.

Label the rooms using room tags.

Duplicate 3D view and create exploded Axonometry drawing.

Add the paths for the exploded components.

Documentations for ground floor plans

Documentations for first floor plan

Documentations for roof plan and add in the roof pitch arrow accordingly.

Documentation for the elevations.

Add room tags in the section drawing

Create ground using toposurface and change material of the surface into grass

add in ground hatching, add foundations and beam.

Add dimensions for elevations and sections.

Documentation for exploded axonometry drawing

Create callouts.

Document the callouts and label accordingly.

Create a room schedule table and add into the sheet.