Embedded Files
Pictured above is the Front Upper A-Arm assembly, which consists of the A-Arm made from structural steel (Yield point @ 250 MPa), and the three corners of the Front Upper A-Arm are SAKAC 8 M with M8 Nuts installed.
Front upper A-Arm finite element analysis
Front upper A-Arm finite element analysis
In the finite element method of the Front Upper A-Arm, the applied load is the load if the maximum cornering force and maximum braking force occur simultaneously, according to the table above, and set the mounting point between the A-Arm and the frame to be fixed support and let the load acting on the mounting point between the A-Arm and the knuckle.
cornering + braking force
cornering + braking force
Boundary conditions
Boundary conditions
Deformation (maximum 0.8 mm)
Deformation (maximum 0.8 mm)
Equivalent stress (maximum 99.75 MPa)
Equivalent stress (maximum 99.75 MPa)
Safety factor (2.13)
Safety factor (2.13)
Page updated
Google Sites
Report abuse