Clutch

Adjusting the Clutch Cable - Lower End

Loosen the adjustment at the clutch lever
Remove:
- Left Side Cover
- Clutch Adjusting Cover
Loosen the locknut
Turn the adjusting screw in until it is lightly seated - Be careful, the screw will keep turning with enough pressure. Just turn it in lightly until it stops
Turn the adjusting screw out 1/4 of a turn
Hold the adjusting screw in place, tighten locknut
Replace covers
Check the clutch cable free play and adjust (at the bar end) as necessary.

Video from Peter P on this procedure HERE. Thanks Peter!

Adjusting the Clutch Cable - Upper End

Follow the procedure outlined in the Yamaha Owners Manual - If you don;t have one, download it from the link in the "New Owner Stuff" section