Clutch
Adjusting the Clutch Cable - Lower End
- Loosen the adjustment at the clutch lever
- Remove:
- - Left Side Cover
- - Clutch Adjusting Cover
- Loosen the locknut
- Turn the adjusting screw in until it is lightly seated - Be careful, the screw will keep turning with enough pressure. Just turn it in lightly until it stops
- Turn the adjusting screw out 1/4 of a turn
- Hold the adjusting screw in place, tighten locknut
- Replace covers
- Check the clutch cable free play and adjust (at the bar end) as necessary.
Video from Peter P on this procedure HERE. Thanks Peter!
Adjusting the Clutch Cable - Upper End
Follow the procedure outlined in the Yamaha Owners Manual - If you don;t have one, download it from the link in the "New Owner Stuff" section