MFC-L2740 Drum and Toner Reset

Post date: Jan 6, 2017 9:44:52 PM

Drum Reset:

1. Press (Cancel) to interrupt the error.
2. Press (Settings) > All Settings > Machine Info. > Parts Life.
3. Press and hold # until the LCD message changes.
4. Press and hold # even if # light is off.
5. Press Drum.
6. Press Yes.
7. Press (Home).

Toner Reset:

1. Open the front cover (where toner goes) and leave open while performing the following steps.

2. Display should read "Front Cover Open".

3. Hold the 'OK' button down for a few seconds.

4. Display will read "Replace Drum?"

5. DO NOT follow prompts on screen. Ignore and type '*00' on keypad.

6. Printer should read "Accepted".

7. Close the cover. Your drum is now reset.