MFC-7360N drum and toner reset

Post date: Aug 17, 2017 11:00:27 PM

Drum Reset

1. Remove the drum unit and toner cartridge. Wait 1 or 2 minutes.

2. Replace the drum unit and toner cartridge into printer.

3. The error message "Change Drum Soon/Drum end soon" will continue to appear if the drum counter was not reset when you replace the drum unit.

4. To clear this error message, you need to reset the drum counter as instructed below.

5. Make sure that the machine is turned on.

6. Press Options or Press Clear or Clear/Back on the control panel.

(If your Brother machine has a numeric keypad: Press 1 to reset the drum counter. If your Brother machine doesn't have a numeric keypad: Press the Up Arrow Key to reset the drum counter.)

7. When the LCD shows Accepted, close the front cover.

8. Your drum is now reset.

Toner Reset

1. Open the front panel

2. Press the clear button, the display will show: REPLACE DRUM? 1. Yes 2. No

3. Type *00 on the keypad, you should see accepted on the display.

4. Close the front panel.