HL-2132 Drum & Toner reset

Toner Reset

1. Ensure the printer is turned off

2. Open the printer front cover

3. Hold the Go button while turning the printer on

4. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All the LEDs will turn off.

5. Press the Go button two (2) times. The Toner, Drum, and Error LEDs will turn on

6. Press the Go button seven (7) times

7. The Error LED should now be flashing, close the front cover

Drum Reset

1. Open the front cover

2. Hold the GO button until all four LED’s are lit

3. Release the GO button

4. Close the front cover