DHCP

On occasion this time, the following article will dwscribe how to make the DHCP server configuration through Winbox on Mikrotik PC Router. Here are step by step to setting up DHCP Server Pc Router.

1. Install Mikrotik Os on your Pc router with two ethernet card ( 1 ethernet for internet connection (ether1) and 1 ethernet for Local connection (ether2)

   1. Connect your pc router to Windows pc using utp cable, look at the picture below:

• 1. Set your IP address....click Tab Menu IP------>Address---->Add

1. Ip for interface ether1 for example: 114.30.82.85/27

2. Ip for interface ether2 for example: 192.168.0.1/24

3. look at the picture below:

• 1. Set Gateway for your internet connection on interface ether1 (internet connection)

1. IP--------Routes----Add

2. For Example Ip Gateway: 114.30.82.65

• 1. Set your DNS Server...IP.....>DNS----tab Setting

1. For example DNS:

2. primary-dns: 114.30.82.90

3. secondary-dns: 114.30.80.34

• 1. Setting DHCP Server

1. IP----Pool----Pools---->Add

2. Name: dhcppool

3. Addresses: 192.168.0.2-192.168.0.100

1. IP------DHCP Server----DHCP----Add

2. Name: dhcpserver

3. Interface: ether2

4. Address pool: dhcppool

1. IP----->DHCP Server---DHCP---Networks---Add

2. Address: 192.168.0.0/24

3. Gateway: 192.168.0.1

4. DNS Server: 114.30.82.90

5. 114.30.80.34

1. IP----Firewall-----Nat----Add

2. on tab General:Chain: src-nat

3. Out Interface: ether1

4. On tab Action: Action: masquerade

• 1. Done

Open Tab New Terminal to try your internet connection with Pc router DHCP Server