5900 IRF port setting
IRF 是HPE 交換器非常重要的容錯技術之一...設定的時候 需要注意....關閉介面的時候 必須要四個介面一起關閉
因為晶片的關係...所以設定上要注意
舉例來說: 使用 Ten 1/0/47~48 來作IRF .... 可是設定的時候 一直有錯誤訊息出來....
告警顯示 Ten1/0/45~48 為相同的 Port Group .. 必須要同時 Shutdown ..才能設定...
請把 Ten 1/0/45~48 關閉後 再設定IRF 就可以依照平常的設定方式 設定
祝各位網路暢行無阻!!
10-GE port restrictions for the HP 5900AF-48XGT-4QSFP+ Switch and HP 5900AF-48XGT-4QSFP+
TAA-Compliant Switch
When you use the 10-GE ports on the HP 5900AF-48XGT-4QSFP+ Switch and HP
5900AF-48XGT-4QSFP+ TAA-Compliant Switch as IRF physical interfaces, follow these restrictions and
guidelines:
• The 10-GE ports are grouped by port number in order, starting from 1. Each group contains four
ports. If you use one port in a group for IRF links, you must also use all the other ports in the group
for IRF links. However, you can bind the ports to different IRF ports.
• Before you bind a 10-GE port to an IRF port or remove it from the IRF port, you must shut down all
the 10-GE ports in the same group.
• Bring up the ports after you complete the operation.
請各位注意 5900 AF-48XGT-2QFP+機種 最後面四個介面 如果拿來做IRF 會被強迫綁成一個Port Group .規劃上請特別注意