The best way to learn how to install and remove a meter is to see it. Watch the videos and all of these techniques will be covered and practiced in field training.

METER INSTALLATION PROCESS

RESIDENTIAL METER INSTALLATION

Inspect Meter Location

• Visually inspect the area around the meter for any signs of charring or burn marks. This includes where the conduit meets the meter can.

• Remove the socket ring or box cover to access the meter.

• Does socket/wiring appear faulty? Is the meter can loose on the wall? – If yes, notify Field Manager and notate issues in the Install App/Field Tool and document with pictures of the issue. Move to the next location.

• If socket/wiring requires replacement prior to install, Field Manager notifies the Utility.

New Meter Installation

• Whenever possible remove or reduce the load from the meter using the bypass or cutting the main breaker (If accessible)

• Remove meter from the box, checking for any cables or connectors that may have been damaged.

• Make sure that the meter type, form, and class match the installation.

• Check voltage of supply side for proper voltage using voltmeter. Document voltage

• Install meter in the appropriate socket.

• Compare wiring with manufacturer diagrams to make sure the meter is wired properly.

• Plug meter terminal blades into socket to make a connection with the terminal jaws.

• Apply load by turning the breaker back on.

• Check to make sure that the LCD operates and sequences through the display items which were programmed into the meter.

Visual inspection

• Confirm power is on.

• Verify meter is secure in socket.

• Reinstall the can cover or ring.

• Install new Utility approved security seal.

Watch these videos