Embedded Files
Checklist
Checklist
Initially when using the Benchtop Saw, ensure you follow the below steps to minimize damage to the machine, and your person.
Remember to put on your safety glasses.
Retrieve your selected piece.
Clear the area on and around the benchtop saw, making sure there is sufficient room for your workpiece.
If you are cutting a smaller piece, have a push stick ready and within easy reach.
Adjust the blade guard height using the black knob closest to your right.
Make sure the blade is not too high from the piece you are cutting
Allow some distance between the piece and your blade before turning on the machine, and do one final check of your piece's surroundings.
Turn on the machine and slowly begin to push the piece into the blade until it is cut to your liking.
Remember to keep your fingers away from the blade!!
If you are using a larger piece, place your hands on the side of your workpiece where the blade is not cutting.
Turn off the machine and clean up any shavings left behind.
Overview
Overview
Similarly to both the horizontal & vertical band saws, the benchtop saw utilizes a thin metal “ribbon like” loop with teeth directed downward to cut materials. The Benchtop bandsaw is often used for cutting angles and mitering. However, in contrast to the other bandsaws, the benchtop version is much smaller, and fitted for tinier pieces. Additionally, the extra portability serves to be more convent for varied use.
Key Features
Frame: Provides support and stability for the entire machine.
Table: A flat surface where material is placed for cutting; adjustable for angle and height.
Blade: A continuous loop of toothed metal that performs the cutting operations.
Blade Guides: Bearings or rollers that support and guide the blade.
Blade Tensioning Mechanism: Adjusts blade tension for proper alignment and optimal cutting performance.
Wheels: Two wheels, one above and one below the table, which the blade rotates around.
Motor: Powers the machine, driving the wheels and the cutting blade.
For videos of usage, visit the Vertical Bandsaw page.
Page updated
Report abuse