These standards are by no means an exhaustive list and is meant as a base standard of work. Unique situations will arise, please direct any questions towards the Project Manager or Superintendent.
Image 4
Ensure all drywall screws are within 2" of any window or doors to allow trim to cover.
Image and Caption Updated 2-16-24
Image 6
Image 6A
Image 6B
Ensure joint walls are completely filled with mud & sanded smooth.
Image updated 2-16-24
Caption updated 11-13-24
Image 15
Ensure marked doorways wrapped in drywall have a 3/4" gap at the bottom.
Image and Caption Updated 2-16-24
Image 9
Ensure ceiling corners are square and smooth as possible and sanded.
Image and Caption Updated 10-23-24
Image 2
Image 2A
Image 2B
All electrical cans, outlets, switches, and HVAC returns are to be cut from drywall.
Image Updated 2-16-24
Caption Updated 10-23-24
Image 5
Tub surround flange needs to be mudded and sanded smooth with no cracks.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 5A
All boxes and fixtures cleanly cut-out.
Image Updated 2-16-24
Image 5B
All air returns are to be cut from drywall.
Image Updated 2-16-24
Image 3
All electrical wiring must be exposed in closets.
Image and Caption Updated 2-16-24
Image 7
Ensure that Tub and Shower head spouts are not covered up and are not damaged.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 1A
Image 1B
Image 1C
Attic access door should open and close smoothly and should have no damage or mud on it.
Image updated 2-16-24
Caption update 11-13-24
Image 11
Ensure no excess mud is in the electrical returns.
Image and Caption Updated 2-16-24
Image 11A
HVAC and Plumbing boxes clear of mud.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 12
INCORRECT: Keep the job clean during installation.
Image and Caption Updated 2-16-24
Image 13
Ensure the kitchen island is plum & square prior to installing drywall.
Image and Caption Updated 2-16-24
Image 14
Do not cut any wires when installing drywall on the kitchen island.
Image and Caption Updated 2-16-24
Image 16a
Kitchen island should be wrapped only on the sides with drywall with 3/4" gap at the bottom. Do not wrap the top with sheetrock as there will be a conflict with countertops later on.
Image and Caption Updated 3-14-24
Image 17
Reminder for all windows & doors to be closed and locked after each workday.
Image and Caption Updated 2-16-24
Image 10
Keep a clean jobsite.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 10A
Sweep up debris after installing panels.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 10B
Pick up loose fasteners and debris.
Image Updated 2-16-24
Image 18
Floors to be swept and windows to be shut at the end of each day.
Image Updated 2-16-24
Caption Updated 2-19-24
Image 8
Remove all buckets of mud and tools.
Image Updated 2-16-24
Caption Updated 2-19-24