f. PCB or prototyping board?

QUESTION:

There are no PCB designs on this webpage. Are you going to release them too in the future?

ANSWER:

I prefer not to bother with making PCB designs. It takes too much time. I simply use prototyping PCBs and wires. If I had a PCB making machine, I would surely prefer to do it your way, but with small resources, it is much more convenient to use small prototyping boards. It is true that you have to be very good and very precise at soldering, if you use my method. I don't have any free floating wire problems and it is also not uncommon for the beginners to have a "free floating contact" problem in their PCBs, if their soldering skills are bad. It is important that you know, what you are doing. You are free to make your own PCB, if you prefer. There are my programming tools that allow you to make a PCB design quickly. But its not my intention to make PCBs, because I also don't like to bother with chemicals (HCl + H₂O₂ + H₂O) to do etching, and drawing a mask in the copper plate before that. This is what anybody can do. I used to do it, too. My intention now is to make successful circuit designs.