ak. What are PIC32MZ2048EC advantages?
Operating Conditions
• 2.3V to 3.6V, -40ºC to +85ºC, DC to 200 MHz
• 2.3V to 3.6V, -40ºC to +105ºC, DC to 180 MHz
• 2.3V to 3.6V, -40ºC to +125ºC (Planned)
Core: 200 MHz (up to 330 DMIPS) microAptiv™
• 16 KB I-Cache, 4 KB D-Cache
• MMU for optimum embedded OS execution
• microMIPS™ mode for up to 35% smaller code size
• DSP-enhanced core:
- Four 64-bit accumulators
- Single-cycle MAC, saturating and fractional math
• Code-efficient (C and Assembly) architecture
Clock Management
• 0.9% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timers (WDT) and Deadman
Timer (DMT)
• Fast wake-up and start-up
Power Management
• Low-power modes (Sleep and Idle)
• Integrated Power-on Reset and Brown-out Reset
Memory Interfaces
• 50 MHz External Bus Interface (EBI)
• 50 MHz Serial Quad Interface (SQI)
Audio and Graphics Interfaces
• Graphics interfaces: EBI or PMP
• Audio data communication: I2S, LJ, and RJ
• Audio control interfaces: SPI and I2C™
• Audio master clock: Fractional clock frequencies with USB
synchronization
High-Speed (HS) Communication Interfaces
(with Dedicated DMA)
• USB 2.0-compliant Hi-Speed On-The-Go (OTG) controller
• 10/100 Mbps Ethernet MAC with MII and RMII interface
Security Features
• Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)
• Advanced memory protection:
- Peripheral and memory region access control
Direct Memory Access (DMA)
• Eight channels with automatic data size detection
• Programmable Cyclic Redundancy Check (CRC)
Here is the summary of PIC32MZ family microcontrollers features:
PIC32MZ is the most powerful Microchip microcontroller family. PIC32MZ2048EC microcontrollers incorporate a full range of functionality that was previously distributed between different specialized microcontroller families. It even has inbuilt Crypto Engine that supports some most popular encryption and decryption algorithms. It supports audio and digital signal processing (DSP). It enables 32-bit precision for signal generation and analysis. It also has the most RAM and EEPROM among all Microchip microcontrollers and the fastest MIPS microprocessor core ticking at up to 200 MHz.
Advanced Analog Features
• 12-bit ADC resolution and up to 48 analog inputs
• Flexible and independent ADC trigger sources
• Two comparators with 32 programmable voltage references
• Temperature sensor with ±2ºC accuracy
Communication Interfaces
• Two CAN modules (with dedicated DMA channels)
- 2.0B Active with DeviceNet™ addressing support
• Six UART modules (25 Mbps):
- Supports LIN 1.2 and IrDA® protocols
• Six 4-wire SPI modules
• SQI configurable as an additional SPI module (50 MHz)
• Five I2C modules (up to 1 Mbaud) with SMBus support
• Parallel Master Port (PMP)
• Peripheral Pin Select (PPS) to enable function remap
Timers/Output Compare/Input Capture
• Nine 16-bit or up to four 32-bit timers/counters
• Nine Output Compare (OC) modules
• Nine Input Capture (IC) modules
• PPS to enable function remap
• Real-Time Clock and Calendar (RTCC) module
Input/Output
• 5V-tolerant pins with up to 32 mA source/sink
• Selectable open drain, pull-ups, and pull-downs
• External interrupts on all I/O pins
Qualification and Class B Support
• AEC-Q100 REVG (Grade 2 -40ºC to +105ºC) Planned
• AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) Planned
• Class B Safety Library, IEC 60730
• Back-up internal oscillator
Debugger Development Support
• In-circuit and in-application programming
• 4-wire MIPS® Enhanced JTAG interface
• Unlimited software and 12 complex breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Non-intrusive hardware-based instruction trace
Software and Tools Support
• C/C++ compiler with native DSP/fractional support
• MPLAB® Harmony Integrated Software Framework
• TCP/IP, USB, Graphics, and mTouch™ middleware
• MFi, Android™, and Bluetooth® audio frameworks
• FreeRTOS™, OPENRTOS®, µC/OS™, and other popular
RTOS kernels
ALSO READ:
- Microchip PIC32MZ microcontroller family datasheet.
- How to connect PIC32MZ2048ECH100 PIM to a standard PCB or Velleman K8055N-2 experiment board?
- PIC32MZ2028ECH100 - 100-pin PIM basic USB circuit
- PIC32MZ2048ECH100 to Velleman K8055-1 experiment board adapter
- PIC32MZ2048ECH100 to Velleman K8055N-2 experiment board adapter