Unit 2: Intelitek Learnmate and Turning Machine

Website Link: CNC BenchMill Center 6100 or Bench Turn7000 Training 

Login: Student#
Default Password: Bulldogs_25
  NOTE: Intellitek Learnmate will require a password change after login

Reference: Safety

Reference: Learnmate Mouse Functions
Right Mouse Button (HOLD) = Rotate and Zoom
Zoom Hold Right Mouse Button +
Move Cursor towards User = Zoom Out
Move Cursor Away from User = Zoom Out
Roll Bar Rotates Machine Vertically

Assignments:  LearnMate CNC Milling  (See  CNC BenchMill 6100 or BenchTurn 7000 Training ) 
Choose Machine: BenchMill 6 x00 or BenchTurn 7x00
Measure: Imperial

Coorindates: Based on the Centerling of the Workpiece
X = Radius of the Workpiece (Forward and Back)
Z = Length of the Workpiece (Left to Right)

Origin Placement: Workpiece Origin Place at the end of the workpiece (NOTE: Intelitek Curriclum places the Z Coodinate flush with the Chuck of the Turning Centerplaces the origin

Programs:
NOTE: Set Z Origin of Workpiece at the End of the Workpiece Shown Above, X Origin will Equal the Radius of the Workpiece.  All Code from Intellitek will  be modified to this origin point
NOTE: Intellitek Base Programs are using a different size workpiece than the machinable wax
Program 1: Turning Center Facing Program  (With Teacher)
Program 2:  Machining Taper  (Activities 6-10)  (With Teacher)
Program 3: Curve (Activity 11)
Program 4: Spinning Top (Activity 12)
Program 5: Bowling Pin (Activity 13)
Program 6: Threading (With Teacher)
Program 7: User Created: Design a Workpiece (i.e. Chess Piece, Table Leg, etc.) that has the following
- Min. of 4 Diameters
- Min of 1 Arc Turn
- Min of 1 Chamfer
- Optional Threaded Feature