Assembly Part Layouts References and Tutorials

Assembly Part Layout Basics

Reference Video: Assembly Part Layout Basics

Reference Tutorial: Add/Delete Linked Files to Creo Drawing, Add Sheets, Change Format for each Sheet
Reference Video: Add/Delete Linked Files to Creo Drawing

Reference Tutorial: Rotating Views Manually

Reference: Parts Layout Demo
  NOTE: Layout similiar to Assembly 1 Base-Plug

      Layout Sheets Include

                - Multiple Parts on a sheet

                 - Designer chooses the necessary number of views for each part and if auxiliary or section views are required

                 - Each Part will have a Title Group that includes Part #, Part Name, Scale (If Different from other Parts). Placement of the Title Group will be located in the same area for every part on every sheet

  Layout Parts Sheets exclude 

                 - Pictorials

                 - Bill of Materials

  Title Block

                   - SH: Sheet Listing listed with sheet# and total sheets (i.e. 2 of 3 or 2-3)

                   - Scale: List scale if all parts are the same or write VARIES if parts are laid out in different scales

Sectional and Detail View Creation

Reference Tutorial: Sectioning View: Full Section
Reference Video: Sectioning View: Full Section

Reference Tutorial: Sectioning View: Offset Section
Reference Video: Sectioning View: Offset Section
                              NOTE: Video shows single part and Assembly 2 Bell Roller Support Offset Section Creation, Layout and Crosshatching Adjustments

Reference Video: Detail View

Reference Video: Revolve Part Layout
Reference Document: Revolve Part Layout
          Note: Revolved Parts (Cylindrical) need minimum of 2 Views: Concentric Circle View and Profile View

Assemblies Assignment(s) Layouts

ASSEMBLY 1:  Base-Plug

Layout: Total Sheets 2.  Page 1 Cover Page and Page 2 Parts with Dimensions

Cover Page: Assembled Isometric, Exploded Isometric with Part Balloons, BOM Chart

Reference: Modifying Dimension Properties in Creo 

       ASSEMBLY 2: Bell Roller Support

Layout: Total 3 Sheets: Page 1 Cover Page and Page 2/3 for Parts with dimensions

Cover Page: Exploded Assembly Isometric or Orthographic, Assembled Assembly Isometric , Detail View of Gap between Bushing and Side Bracket (Provide dimension of gap) and a Offset Orthographic Section (SEE ATTACHED SHEET FOR EXAMPLE SECTION (Cut Through two front holes and center of brackets/pin/spindle/bracket; Make sure the ribs show up on your section) Be sure to apply notes like the gap between the bracket and pushing.)

     Reference: Modifying Dimension Properties in Creo 

     Reference Video: