Tasks and Reference Materials
Review Part: 2D to 3D Bracket
Creo Reference Video: Setting/Changing Units
Design the Part in Creo > Layout 3 Views on B-Size Title Block w/ Dimensions
Reference: Dimension Guidelines, Creo Modifications, etc
Reference Tutorial: Creo Settings for Printer: B-Size (11 x 17) Paper
NOTE: DO NOT Choose 11 x 17W. The copier does not have this size paper and will cause the copier to fault out
Unit 1: Sketching: Descriptive Geometry
Tutorials and Assignments: True Length Line, True Size Surface and Intersections
Unit 2: Revolves
Tutorial and Assignments: Revolve Solid Model Tutorial, Parts 1,2,3, Revolve Layout Tutorial
Unit 3: Auxiliary Drawings
Tutorials and Assignments: Auxiliary Sketches, Reference Auxiliary Views, Part 10-11 Auxiliary Parts
Unit 4: Assembly Design and Layout Basics
Tutorials and Assignments: Tutorial Lego Assembly, Assembly 1 and 2, Reference Documents for Assembly, Explode Views, Cover Page Layout and Parts Layout
Unit 5: Threads
Tutorials and Assignments: Thread Chapter Reading, Tutorial Nut and Bolt Simplified Threads, Assembly 3, Tutorial Sweeps/Helical Sweeps, Assembly 4
Unit 6: Assembly 4 Student Choice Assembly
Tutorials and Assignments: Assembly 4
Unit 7: Mechanized Assemblies
Tutorials and Assignments: Develop the use of advanced connections to apply motion to an assembly (i.e. pin, slider, cylinder, slot, etc. connections). Tutorials show the use of servo motors and view creation to develop motion analysis and video exports.
Unit 8: 3D Scanning
Dimensional Reference
If you see the following sizes at two places past the decimal on your worksheets adjust to three or four places past the decimal on your solid model only
1/16 or 0.06 or .062 or .063= 0.0625
1/8 or 0.12 or 0.13 = 0.125
3/16 or 0.18 or 0.19 or or 0187 or 0.188 = 0.1875
1/4 or 0.25 = 0.25
5/16 or 0.31 or 0.312 or or 0.312 or 0.313 = 0.3125
3/8 or 0.37 or 0.38 = 0.375
7/16 or 0.43 or 0.44 or 0.437 or 0.438 = 0.4375
1/2 or 0.50 = 0.50
9/16 or 0.56 or 0.562 or 0.563 = 0.5625
5/8 or 0.62 or 0.63 = 0.625
11/16 or 0.68 or 0.69 or 0.687 or 0.688 = 0.6875
3/4 or 0.75 = 0.75
13/16 or 0.81 or 0.812 or 0.813 = 0.8125
7/8 or 0.87 or 0.88 = 0.875
15/16 or 0.93 or 0.94 or 0.937 or .938 = 0.9375
Approved Scales
Any scale that is found on a drafting triangular scale is approved
Common Scales
2.000 = 1.000
1.500 = 1.000
FULL or 1.000 = 1.000
.750 = 1.000
.500 = 1.000
.375 = 1.000
.1875 = 1.000
.250 = 1.000
.125 = 1.000