Solid Modeling
Creo Software Overview
Reference Video: Creo Software Overview
Reference Video: Saving
Solid Modeling
Tutorial: Extrude Tutorial 1 Profile Sketch
Submission: Email Teacher with a screenshot of tutorial
Design Parts: DWG 1-4
Directions: Create Solid Models of each part. Check starting Datum listed and
Extrude Distance Listed
Save each file using the following string for the file
File Name: Computer#Part#Partname (I.E 0101Ublock)
NOTE: Each part only needs 1 extrude
Be sure to place the sketch on NOTED Datum.
Set Dimensions that are listed
Extrude Distance is listed below each part
Press on I on the keyboard to place design as Isometric. Completed design
should look exactly has shown on the worksheet.
Layout Multi-View(s)
Download: A-Size Title Block
NOTE: Open .Zip File > Copy A-Size Title Block Format File (.frm) > Paste with
Part and Layout Files in Student Directory
Download: B-Size Landscape
NOTE: Open .Zip File > Copy B-Size Title Block Format File (.frm) > Paste with
Part and Layout Files in Student Directory
NOTE: B-Size Title Block will not be used until later in the semester
Tutorial: Layout Views Drawing 1
NOTE: Scale for Orthographic (3 VIews; Front, Top, Right Side) Views on DWG 1-4 is Full or 1.000= 1.000
Isometric Scale Varies depending on size. Make sure the Isometric does not interfere with the other three views
Assignment: Repeat Tutorial Steps for Parts 2,3 and 4
Dimensioning
Assignment: Read Chapter 10 Dimensioning and Notes
Exploring Drafting Textbook (White Cover) Chapter 10 Page 236
Answer Test Your Knowledge Questions 1-20 at the end of the Chapter (ALL CAPS). DO NOT write out the question; just the answer.
OR
Exploring Drafting Textbook (Blue Cover) Chapter 9 Page 141 i
Answer Test Your Knowledge Questions 1-20 at the end of the Chapter (ALL CAPS). DO NOT write out the question; just the answer.
Tutorial: Basic Dimensioning(Tutorial Dimensioning for DWG 1)
Reference: Dimensioning Rules and Guidelines
Reference: Do's and Don'ts to Dimensioning
Assignment: Follow the following tutorial to dimension DWG 1. Repeat steps for DWG 2-4.
NOTE Parts are already dimensioned. Open DWG 1-4 Basic Extrudes File. Copy
dimensions as seen on each part and place the extrude distance on one of
the other views.
NOTE: One View (Profile View) will have the majority of the dimensions, One
View will only have 1 dimension (extrude distance) and One View will
have NO dimensions. (NOTE: Isometric is not a view).
Fill out the title block. Scale: FULL or 1.000=1.000. All Text Height in the title
block will be .1 Tall. Line up the text to the text that is already given.
Print Each Drawing when Completed