Horizontal Cabinet Openings

You can manage your door (and drawer front) dimensions for a cabinet. You can specify the heights (or widths) that you want to use - or get CabinetSense to make them all the same.

You can work with door and drawer dimensions OR inside openings.

With your door layer active, the dialog works with the door and drawer front dimensions.

Turning off the door layer, the dialog works with your inside openings.

When you change a dimension, the difference is applied to the last space. This is right width or the top height depending on which manager you are using. Using the above as an example, changing Opening 1 to 200mm would result in the following:

If you had wanted the middle section to absorb the change, you could have erased the value in Opening 2. This tells CabinetSense to stop rolling the change forward.

Results in this:

If you change the action to Equalize, all three openings are made the same size.

This works equally well with Cabinet Openings and doors and drawer fronts.