Registration Forms: Fillable PDF and PDF , Event Flier, Schedule & TWS #
(Must Bring Completed to Registration/Check in on the Day of Event)Liability Waiver and Release Form
(Must Bring Completed to Registration/Check in on the Day of Event)
Dr. William R. "Billy" Harrell was a pioneer in the establishment of agricultural mechanics project shows and the creation of the Tractor Technician Career Development Event. He is known by thousands of our students as the man on the oxyacetylene video and countless other ag mech instructional videos.
He was a true teacher with a heart for all students—at both the secondary and collegiate levels, and left a legacy for students and teachers that will stand the test of time. He was serving students and teachers to the very end of his life.
Testing Location #2:
Arc Labs9510 N Houston Rosslyn Rd.Houston, TX 77088Location 1- QUESTIONS - IWS
vsanchez@iwatraining.com Veronica SanchezLocation 2- QUESTIONS - ArcLabs
Jamail.Blunt@arclabs.eduJamail BluntThis event is for welding students that would like to take a welder qualification test on the SMAW or FCAW processes. Students will follow an AWS D1.1 Welding Procedure Specification to complete the welding test. If the student passes the welding test, a Welder Performance Qualification Record (Certification) will be written and stamped by a Certified Welding Inspector.
There are no fees for these events.
The testing will start at 8:00 am and end at 4:00PM.
Students will need to bring their welding safety equipment in order to participate.
The testing will start at 8:00 am and end at 2:00 PM.
Schools will be scheduled a time slot for Safety Meeting and Welding Test.
View Scheduled Times, School and Student Info by clicking the link below.
Email Forms Completed Registration Forms to:
TXHSWS@gmail.com
There is no fee for this event.
All safety rules will be observed.
Contestants will provide all proper PPE
Each contestant will be assigned a TWS number that will be written on their coupons.
All contestants must clean welding stations after use.
Observers will not be allowed in the competition area.
Students need to bring tools. (chipping hammer, wire brush, hood and pliers)
Students will need to select their position and process prior to the Registration Deadline Friday, April 30th for the Certification Date.
Students will go through brief safety inspection and training before each group enters the weld testing area.
All Students who pass visual inspection on their Weldment, will move on to be tested for a 1G or 3G Certification in accordance with AWS D1.1.
All plates that pass visual inspection will be send to X-Ray, by Acuren. Schools will be able to down load their X-Rays from the website after the event!
Location 1 - IWS
vsanchez@iwatraining.comLocation 2 - ArcLabs
Jamail.Blunt@arclabs.eduLiability Waiver and Release Form
(Must Bring Completed to Registration/Check in on the Day of Event)* All students testing must bring all the appropriate personal protective equipment: Safety glasses, long sleeve welding shirt, long pants with no cuffs, leather boots, welding hood, gloves, chipping hammer, wire brush, and pliers. Grinders with wire wheels are allowed & light grinding is allowed.
ONLY TEST COUPON AND ELECTRODES ARE PROVIDED- MUST BRING OWN PPE/TOOLS!
* All students MUST bring the completed "Weld Testing Form" and the "Liability Waiver and Release Form"
-- Liability waiver requires parent or guardian signature.
1. Arrive at the testing location 15 minutes before your schedule weld time. Safety Meetings will begin at or before the scheduled time for each school.(15-20min) Liability Waiver and Release Form will be turned in at Safety Meeting.
2. Weld Testing Form will be checked by one of the facilitators at each location to confirm your welding position and process. The facilitators will give you your test plate already tacked together and show you what welding booth to use. Make sure your test plate is marked with TWS# before you take it to the visual inspection table.
3. TIME LIMIT: 30 Minutes in the Booth. Time will be marked by facilitator on you Welder Testing Form when you enter the booth and time will be marked when you complete your weld by the facilitator MAX Test Time is 30mins!
4. Take your marked test plate and this Welder Testing Form to the visual inspection table.
5. Follow all safety rules. For example: safety glasses must be worn at all times and safety glasses with a face shield must be worn when grinding.
Position: 1G Plate
Base Material: 2-3/8”x3”x7” Carbon Steel *
Backing Material: 1-1/4”x3”x8” Carbon Steel to Match Base Material Specifications *
Weld Joint: Single V-Groove Plate
Complete Joint Penetration (CJP): Requires Backing Bar
Bevel Angle: 45 Degree Included Angle (22.5 Degree per Bevel)
Root Opening: 1/4”
Land or Root Face: No Root Face
Groove Side: Multi Pass Fill and Cap (all welding on groove side only)
Electrode Diameter and Classification: 1/8” or 3/32" E7018
Weld Size: 3/8” Max Single Bead Width and 1/8” Max Weld Reinforcement Height (Cap)
Welding Code: Performance Qualification, Visual Inspection, and RT to AWS D1.1 Structural Welding Code-Steel
Position: 3G Plate
Base Material: 2-3/8”x3”x7” Carbon Steel *
Backing Material: 1-1/4”x3”x8” Carbon Steel to Match Base Material Specifications *
Weld Joint: Single V-Groove Plate
Complete Joint Penetration (CJP): Requires Backing Bar
Bevel Angle: 45 Degree Included Angle (22.5 Degree per Bevel)
Root Opening: 1/4”
Land or Root Face: No Root Face
Groove Side: Multi Pass Fill and Cap (all welding on groove side only)
Electrode Diameter and Classification: 1/8” or 3/32" E7018
Progression: Uphill Progression Only
Weld Size: 3/8” Max Single Bead Width and 1/8” Max Weld Reinforcement Height (Cap)
Welding Code: Performance Qualification, Visual Inspection, and RT to AWS D1.1 Structural Welding Code-Steel
Welds and Plate Prep
Safety glasses, long sleeve welding shirt, long pants with no cuffs, leather boots, welding hood, gloves, chipping hammer, wire brush, and pliers. Grinders with wire wheels are allowed & light grinding is allowed.
AWS D1.1 Qualification - All Positions
Position: 1G Plate
Material: 2-3/8”x3”x7” Carbon Steel
Backing Material: 1-1/4”x3”x8” Carbon Steel to Match Base Material Specifications *
Weld Joint: Single V-Groove Plate
Complete Joint Penetration (CJP): Requires Backing Bar
Bevel Angle: 45 Degree Included Angle (22.5 Degree per Bevel)
Root Opening: 1/4”
Land or Root Face: No Root Face
Groove Side: Multi Pass Fill and Cap (all welding on groove side only)
Electrode Diameter and Classification: 0.045” E71T-1M Tubular Gas Shielded Flux Core Wire
Shield Gas: C25 (75%Argon and 25%Carbon Dioxide)
FCAW: Single Root Pass (1/8” Max Root Reinforcement Height)
FCAW: Multi Pass Fill and Cap (1/2” Max Bead Width and 3/16” Max Reinforcement Height)
Welding Code: Performance Qualification, Visual Inspection, and RT to AWS D1.1 Structural Welding Code-Steel
Position: 3G Plate
Material: 2-3/8”x3”x7” Carbon Steel
Backing Material: 1-1/4”x3”x8” Carbon Steel to Match Base Material Specifications *
Weld Joint: Single V-Groove Plate
Complete Joint Penetration (CJP): Requires Backing Bar
Bevel Angle: 45 Degree Included Angle (22.5 Degree per Bevel)
Root Opening: 1/4”
Land or Root Face: No Root Face
Groove Side: Multi Pass Fill and Cap (all welding on groove side only)
Electrode Diameter and Classification: 0.045” E71T-1M Tubular Gas Shielded Flux Core Wire
Shield Gas: C25 (75%Argon and 25%Carbon Dioxide)
FCAW: Single Root Pass-Uphill (1/8” Max Root Reinforcement Height)
FCAW: Multi Pass Fill and Cap (1/2” Max Bead Width and 3/16” Max Reinforcement Height)
Welding Code: Performance Qualification, Visual Inspection, and RT to AWS D1.1 Structural Welding Code-Steel
Welds and Plate Prep
Safety glasses, long sleeve welding shirt, long pants with no cuffs, leather boots, welding hood, gloves, chipping hammer, wire brush, and pliers. Grinders with wire wheels are allowed & light grinding is allowed.
AWS D1.1 Qualification - All Positions
THANK YOU FOR COMPETING AND PARTICIPATING IN THE
2021 Dr. Billy Harrell Welder Certification Day!
Donating XRay Services!
