Wire Sculpture

The instructions for this project was to pick and object and then try to match the shape as best as you could with pieces of wire. 

The materials I used for this assignment was very simple, I used two different kinds of tools, wire cutters and  needle nose pliers to cut and shape the wire. 

My process for this project was very difficutlt, because I could never seem to get my knots tight enough my heart was always lopsided, to try and solve this I kept adding more and more wires from the bottom of heart to the top. But this didn't do anything, so in the end I ended up taking a lot of the connecting wires off which helped a little.