a selection of the CNC results; plans are available under https://github.com/TiSpace/CNC-milling
made of beech and acacia wood
made out of beech, partially coloured with wood stain.
Credit for plans goes to Raimund and his thread in CNC-aus-Holz.at
white LED strip with PWM regulator
made out of 10mm multiplex birch wood
upper and lower part fits together - maybe some adjustment for proper fitting needed. Make it tight - but not too tight...
door sign made of plywood with gabun veneer
Detail
litte give-away: soap with some milling
graving milling bit, depth 1mm
milling bit 1mm diameter
roughly 50cm in heigth welcomes our visitors at the door
taken from a photo, vectorized and then milled, painted and glued together
simple construction to hold the laptop next to the CNC machine
nice box - not only for Valentine's Day :-)
This piece of cherry tree ended up in a second life as decoration bowl. Milled out but kept the bark! As there has been a couple of cracks, I've added a couple of oak butterflies. Very important: the whole subject has been covered with a couple of transparent epoxy layers. Looks nice!
smaller version of apple branch refined to a bowl. Finish made with epoxy resin
Made as birthday present. Holds six bottles of drinks (water of course!). As gadget there is a built in electronic: lightshow (RGB-Strip) controlled by a touch sensor (TPS221) and powered by a reused LiPo 1S cell with charging and protecting.
award fora birthday, jubilee or others. Made out of two different kinds of wood, in addition the bike has some brown glaze.
Made individual by laser written text, signatures etc. (the blurry area on the picture). This makes this piece of art very unique! Other motive than a bike is possible
This is a holder for wine bottle and glasses as well as for some snacks. Made out of bleech wood, applied with some glaze and for decoration brass screws
simply figure of an lazy elk
Inspired by the North Sea and decorated with seashells from around the world
Layers of Plywood, credit goes to ZenziWerken
milled with a 45° tool, sice is ~35cm x 60cm
The frame hosts a white LED strip powered by a battery on the back side
Material: MDF whit white surface
100th birthday - money present
100th birthday - money present
found a picture and created this angel for christmas. Easy to scale in smaller versions, this one is ~60cm in height
In the beginning there are some trials needed, some of them are listed here