FORMED HAMS

Formed ham is made up of many individual meat cuts. When we purchase ready to eat ham we assume that it comes from a whole meat. This is due to our familiarity with images of country side hams hanging from the hooks or large hams lying in supermarket displays. This assumption is the correct one as traditionally made hams were after all a rear leg of a hog. This preconceived opinion is then applied to a boiled ham which looks as it were carved from a solid piece of meat. Although most one piece hams are smoked and then water cooked, they can be easily recognized by their characteristic shape. Yet the rectangular or oval shaped hams and individually sliced and packed ham packages do not come from one leg of the hog. They come from different animal parts, for example from the front and the rear legs or from different animals all together. In addition to hams, other products such as turkey or beef rolls may be produced. By choosing different shape forming molds, products can be made in the shape of pork chops, ham steaks and others.

The process for making formed products looks easy but there is more to it. First of all the individual meat cuts must stick together and when cooked, retain the shape of the mold without having any holes inside. This is accomplished by producing sticky exudate on the surface of meat pieces. Think of it as glue that binds the individual meat cuts together upon heating. The exudate is formed when the muscle’s cell structure is disrupted which releases protein called myosin.The disrupting of the muscle structure is accomplished by a physical action such as cutting or mechanically working meat pieces inside of the tumbler. For making formed meat products fine cutting or grinding is out of the question and massaging or tumbling is the preferred method. Using mechanical action by itself will tenderize meat but will not produce enough exudate. To release more proteins salt and phosphates are injected to meat prior to tumbling.

If a final formed ham product consists of a few individual muscles, the following must be observed:

There must not be any fat on surfaces which are in contact with each other.

All membranes or silver skin must be removed from each muscle or at least cut with a knife.

If those rules are not followed the final product will exhibit holes and will not hold its shape when sliced.

Meat selection.

Lean meat contains more protein so selecting lean cuts will produce more exudate and the result will be better binding. A ham is a lean cut of meat and during the meat selection process the butcher removes lean whole muscles of meat and puts them aside. To bring exudate to the surface we have to eliminate the unnecessary obstacles such as sinews, external fat, skin, membranes and silver skin. The surface of the meat must be clean. The meat cuts must be sorted by color otherwise the final appearance will not be one of intact muscle. Grouping meats of similar diameter for the tumbler will result in a more uniform distribution of a curing solution and better protein extraction.

Curing.

It is expected that adding about 3% of salt results in optimal protein extraction. Salt makes the cells swell and some proteins are released and a solution (exudate) of water, salt and protein is created. In order to produce even more exudate, more proteins must be released which is accomplished by adding 0.3-0.5% phosphates. Phosphates, although much more effective than salt in protein extraction, their effectiveness hugely increases when they are combined with salt. Meats are pumped with solution containing salt, phosphates nitrite and color enhancer. If the meat is pumped with over 25% of the green weight (original) the meat protein solution will be weaker and the binding strength will decrease. There is a limit to how much water can be held by phosphates and the excess will be lost during cooking.

Colour.

Sodium nitrite is always added which results in a red color, better flavor and longer shelf life. Although sodium nitrite works with meat through chemical reactions, the time that is dedicated for making whole muscle formed meat products is still not sufficient for obtaining a strong color. It has been observed that after tumbling meat becomes paler, most likely due to oxygen reacting with meat structure during mechanical action.

This effect is largely decreased when a vacuum tumbler is employed as there is no air to react with meat. Foaming of the exudate on the surface of meat is also eliminated. Although holding meats for a few hours at room temperature will definitely help with curing color, such a procedure can not be employed in commercial production as it leads to the growth of bacteria and subsequently to a decreased shelf life of the product. To make up for insufficient curing time ascorbic acid (vitamin C) is added to the curing solution. Ascorbic acid forces sodium nitrite into producing more nitric oxide, which in turn reacts with myoglobin which is always present, although in different amounts in meat. This results in a strong red color which will be permanently secured by cooking.

Tumbling.

The most efficient protein extraction is obtained at 36-38° F (2-4° C) working temperature. Boiled hams exhibit smaller weight loss than the baked ones. On the other hand baked hams look nicer due to the shiny and glazed surface which is due to the coating of brown sugar, honey or other ingredients. Experienced sausage makers swear by the fact that hams should be inserted into boiling water and kept at the boiling point for the first 10-15 minutes. Then the temperature should be lowered to 80° C (176° F) and remain at that level until the ham is fully cooked. The explanation is that the proteins in the outside area will be immediately cooked which leads to the development of a hardened surface. This in turn will prevent meat juices from migrating into water and the finished product will be juicier. The analogy will be grilling a steak when the surface area is seared first at very high temperature and then the steak is cooked at a lower temperature setting.

A commercial producer will place pumped meat in a tumbler and salt equalization will be performed inside of the machine.

Meats are usually tumbled in two ways:

10 minutes “on” and 50 minutes “off” for each hour tumbled. Depending on the size of the ham it can take from 8-24 hours.

3 continuous hours, then let hams rest in the tumbler overnight. The next day the ham is tumbled for an additional 30 minutes before stuffing.

Those times are not set in stone and often hams are continuously tumbled for one hour and then submitted to thermal treatment. Such a ham can be manufactured in one single day.

Stuffing.

Individual meat cuts are then stuffed rather loosely into a cook-in bag and the bag is vacuum sealed. If the meats were stuffed firmly, the bag may not conform to the shape of the mold. Then the bag is placed into a mold of a chosen shape. The meat cuts must be pressed against each other with some force, which is accomplished by adjusting the pressure of the top cover. The meat cuts may also be stuffed into a large fibrous casing. They should be stuffed rather loosely as the casing is often placed inside of a press to develop an oval shaped ham. Those presses are then cooked in hot water.

Ham Press

Operation of a ham press

A ham press consists of a container 1 and a top cover 2 which can be forced into the container 1 to compress the meat. The top of the container has a retaining rim 4. A compression handle 8 which consists of a strut (handle) 8, compression springs 6, and the securing arm 7, engages the retaining rim 4 and forces container 1 and cover 2 together compressing the ham. Strut 8 is penetrated by two upright rod guides 5, such as with adjustable nuts or screws, attached to the cover 2 and enclosed in adjustable tension compression springs 6 that rest against the cover 2 and below the strut 8. At each end of the strut 8 the securing arm 7 pivots toward and away from the container 1.

The edge of securing arm 7 that faces the container 1 has teeth 3 that engage below the retaining rim 4 of the container 1. Pressure on the strut 8 compresses the springs 6 and forces the cover 2 into the container 1. At the same time the teeth 3 on the securing arm 7 engage the retaining rim 4. When the pressure on strut 8 is released, the cover 2 is retained in the position in which it is by the particular tooth 3 on each security arm 7 which engages below the retaining rim 4. This engaged position is also ensured by the tension on the compression springs 6. Since the tension on the compression springs 6 also forces the cover 2 deeper into the container 1, as the ham shrinks during the boiling process, the ham is always firmly compressed even as it shrinks. The securing arms 7 remain in the engaged position while the springs 6 force the cover 2 down.

Home Made Ham Presses

There is a great variety of home made presses and they all work very well. In many cases people don’t use a ham press at all and they use a big waterproof casing. The simplest design we have seen is a tall stainless steel cylinder with a wooden cover and a large stone used as a weight. Such long pots are known as stainless steel vegetable insets and are distributed by restaurant equipment suppliers. The same companies also sell different kinds of rectangular steam table pans which can be easily adapted for making ham presses.

A simple adjustable pressure ham press. This is a different arrangement of the above mentioned method. A rubber band made from the inner tube tire provides pressure against a glass jar or a solid block of wood. A bungee cord will work too. Note: water level in a cooking pot remains below the top of a ham press.

The simplest set up. Stainless steel cylinder, wooden cover and weight.

Smoking.

You can not smoke formed ham as the meat is inside a metal ham press. There are special ham presses made of adjustable pressure screens which hold a boneless ham or a butt and they allow smoke to go through.

Cooking.

The mold with the ham inside is placed in hot water (176-180º F, 80-82º C) and cooked until meat reaches an internal temperature of 155-160° F (68-72° C). The higher the temperature, the shorter the cooking period. In order to destroy any trichinae that might be present, a ham should be cooked to at least 137º F ( 58.3º C), but such a ham is not considered very palatable. A temperature of 148-160º F (65-72º C) produces a product with better flavor and texture. The length of cooking time is based on the weight of the hams and 30 minutes per pound of meat is an average.

Cooling.

The mold is taken out (meat remains inside) and is cooled down. Then it goes into a cooler overnight. The next day the mold is opened and the ham is removed. The ham permanently retains the shape of the mold it was in.

The Gel.

When you cook any meat some of the fat and meat juices come out and are lost. In a frying pan this substance accumulates on the bottom and many people use it for making gravy. Since formed meat products are cooked in a sealed container, these juices have nowhere to go and when cooled they become a “gel.” This gel is nothing else but the best that a ham can offer. For many years formed meat products contained the gel inside. Some people loved it, others hated it, some children cried at the site of this gluey substance. Since 2001, in commercial products potato starch has been added as an absorbent material to prevent the formation of gel. You still eat the gel but it can not be seen now. So if your child objects to eating this delicious gel, just scrape it off.

Ham Flavor

With all due respect to the latest advances in meat science technology, it must be said that the flavor of today’s commercially produced hams is just an echo from the past. They are nutritious, pretty and juicy, but exhibit little flavor. This is due to the following reasons:

Little fat. Hams in the past were produced with the skin and the underlaying layer of fat. Somehow this fat layer intensified and preserved the flavor and aroma of a ham. It is like monosodium glutamate (MSG) which is used during cooking. When added to meat it brings out the best of its flavor. The animals themselves were bigger and much fatter which also positively contributed to meat flavor.

A lot of water. With today’s permissible injection rates of between 40 and 100% curing solution, the meat is juicy but has a diluted flavor. This juiciness is due not to the meat’s natural flavor but to the added water. Chemicals such as phosphates open a cell’s structure and unwind the protein structure. These hold the added water not only during curing but also during the cooking process as well, which results in a smaller cooking loss but in a higher profit for the manufacturers.

Added ingredients.

To make this gain possible, many ingredients such as soy protein isolate, phosphates, or ascorbates are added. Although they are added in small amounts they all taste bitter and this adds up. To compensate for that more flavorings and spices are added.This is a chain reaction which results in a product which is still healthy and safe to a consumer, but is not the same ham which will be produced on a farm using traditional methods.

The flavor of the ham also depends on the cooking method:

The difference in flavor between a commercially produced formed ham and a formed ham made at home is significant. The home made ham has a wonderful aroma that is easily noticed. It also has a strong meaty flavor as it was not injected and diluted with water. The slices of home made ham keep on losing moisture in the refrigerator and become drier. The slices of commercial made ham or other meat products feel wet when removed from the package. They become more slimy as time goes by due to the curing solution that is losing its holding power and beginning to leak out. The meat has no reason to feel slimy when held under refrigeration as there is only about 40% humidity present. Such meat will start drying out, even when kept in a container.

Luncheon Meats

Luncheon meats are finely ground meats which are usually cured and canned. They can be made at home following the technology for making formed meat products. This means that the meat is ground, cured, stuffed into the mold and cooked. The best example of a canned luncheon meat is American made SPAM® which became famous in 1937. The name SPAM is an acronym for “spiced ham” or “S-houlder P-ork h-AM.”