Instructions for the use of ECZ400
Requirement of registration
Registration is required to use ECZ400.
You may apply for registration at any time.
Please renew your registration every year.
Read the following notices and then proceed to the registration form.
The registration form includes a quiz for you to use NMR safely.
The registration will be accepted after evaluation of the quiz answer, following approval by the laboratory manager. It may require few days.
Safety precautions
Do not bring metal products (keys, tweezers, etc) in the NMR room.
Beware of asphyxiation due to vaporization of refrigerants (liquid nitrogen and liquid helium).
Take a safety training course of liquid nitrogen and liquid helium at the Liquid Helium Center. Announcement of safety training.
Take appropriate training before measurements. Contact staffs if you have any concerns about operation.
Status of ECZ400
Check this page or sheet 1 of the file to reserve for scheduled suspension due to maintenance and troubles.
Be aware of any other posted precautions.
When you have any trouble, contact your lab's staff.
Reservation System
This equipment is shared by multiple laboratories. All measurements require reservation in advance.
Short-time reservation up to 3 hr with 10-minutes increments is available during the daytime (9:00 to 18:00, but not later than 18:00).
Nighttime (18:00 to 9:00) will be reserved as a single reservation term.
You can make a reservation for a short measurement during nighttime hours if ECZ400 is not reserved on the day after 18:00. However, please follow the rules of each laboratory for nighttime experiments.
Reservations are made via shared spreadsheet
File to reserve from 2023.4.3. or ELMS > G-suite > Drive > shared items.
Please fill your name with laboratory name or ext.no in the cell.
Please use ECZ400 after logging in with username/password of your laboratory. It will be used to take logs.
Take a copy of your measured data. Do not store them in the PC of ECZ400 room for a long time.
Registration
Those who took safety training and read and understood the above notice can register from the following registration form.
Registration form (for using ECZ400 from 2023.4.3)
You need to log in to ELMS before accessing the registration form.
The registration form includes a test to ensure safe use of NMR.
The registration will be accepted after evaluation of the quiz answer, following approval by the laboratory manager. It may require few days.
You will be noticed via e-mail when registration is completed. Reservation of ECZ400 is available after completion of registration.