Embedded Files
Steps to remove the LCD Bezel, LCD, LCD Cable from the non-touch LCD Housing.
To remove the lcd bezel place a spudger in between the bezel and the housing and release the clips holding the bezel in place. Do this around the entire perimeter and the lcd bezel should be removed easily.
There are 4 screws holding down the lcd. Remove these screws.
Lift the lcd away from the housing to expose the lcd cable.
The lcd cable on this device has a plastic tab over the connector, lift this away from the lcd so that you can grab the tab.
While grabbing the tab gently remove the lcd cable from the lcd.
The lcd cable is connected with the camera cable, to remove this cable you have to undo the hinge which is held in with 4 screws, Removes theses screws and the hinge. Run the lcd cable along the side to release it from the housing.
* To reassemble follow the above steps in reverse.
Report abuse