ttm008 series

ttm008(Guitar A)/ttm009(Brass A)/ttm010(Synth B)

MIDI data was created by myuu.

ttm008 series is a sound generator with a unique waveform synthesis engine and modulation mechanism. ttm008 series is based on the synthesis engine of ttm002 and optimized for guitar.

By adjusting three carefully selected parameters, any desired tone can be obtained with simple operation.

For final tone adjustment, a high-pass filter and low-pass filter are provided.

It is designed to produce an impressive sound with rich overtones, rather than to approximate a real instrument like a sampled sound source.

ttm008(Guitar A) Ver.03.01：Download from KVR website

1) Fixed a bug that when multiple plug-ins are activated and one of them is closed, the other plug-ins cannot be operated.

Please note that the data is not compatible with Ver.2xx.

ttm009(Brass A) Ver.02.01：Download from KVR website

1) Fixed a bug that when multiple plug-ins are activated and one of them is closed, the other plug-ins cannot be operated.

Please note that the data is not compatible with Ver.1xx.

ttm010(Synth B) Ver.02.01：Download from KVR website

1) Fixed a bug that when multiple plug-ins are activated and one of them is closed, the other plug-ins cannot be operated.

Please note that the data is not compatible with Ver.1xx.

Feature

Generation of basic waveforms from nothing using a unique algorithm.
Generation of tones with rich overtones using a unique modulation mechanism.
Generation of arbitrary sounds with simple operations.
Small memory usage and light load.

Parameter Description

Window

Adjusts the range of rounding of both ends of the basic waveform in the range of 0 to 100. The larger the number, the softer the tone tends to be. The image below shows the upper waveform at 0% and the lower waveform at 100%.

Modulation

The higher the number, the stronger the modulation effect and the more overtones tend to be.

The modulation strength can be changed in real time between 0 and 100 using the 0-127 value of control change number 20.

Atack

The higher the number, the stronger the attack.

The attack strength can be changed in real time between -80 and 100 using the 0-127 value of control change number 21.　

Sustain

The higher the number, the longer the sustain time.

Filter

Adjusts the filter.

HP:Adjusts the high-pass filter cutoff frequency between 100 and 1000 Hz.
LP:Adjusts the cutoff frequency of the low-pass filter between 2000 and 20000 Hz.

Tips

Fine-tune the settings.

If you operate the GUI while holding down the Shift key, the amount of change in value is reduced to 1/5 of the normal value, making fine adjustments easier.

Old version

ttm008(Guitar A):

Ver.03.00 (2023/10/14)

1) Fixed a bug that patch data was not properly saved to the host.

Ver.02.03 (2023/10/06)

1) Fixed a bug that prevented program changes from being executed immediately after startup.

Ver.02.02 (2023/09/28)

1) Fixed a problem in which patch data saved in the host was not reflected correctly.

Ver.02.01 (2022/10/16)

1) Adjust preset parameters.

2) Fixed a bug that caused division by zero.

Ver.02.00 (2022/07/30)

1) Corresponds to the change of pitch bend width by data entry (CC#6).

2) Supports volume control (CC#7).

Ver.01.00 (2022/07/09)

1) Corresponds to the change of pitch bend width by data entry (CC#6).

2) Supports volume control (CC#7).

3) Supports pan pot (CC#10).

4) Supports expression (CC#11).

Ver.00.02 (2022/07/04)

1) Modified to adjust volume by velocity.

2) Added the ability to adjust sustain time.

Ver.00.01 (2022/07/02)

ttm009(Brass A):

Ver.02.00 (2023/10/14)

1) Fixed a bug that patch data was not properly saved to the host.

Ver.01.03 (2023/10/06)

1) Fixed a bug that prevented program changes from being executed immediately after startup.

Ver.01.02 (2023/09/28)

1) Fixed a problem in which patch data saved in the host was not reflected correctly.

Ver.01.01 (2022/10/16)

1) Adjust preset parameters.

2) Fixed a bug that caused division by zero.

Ver.01.00 (2022/07/30)

1) Brass A is released.

ttm010(Synth B):

Ver.02.00 (2023/10/14)

1) Fixed a bug that patch data was not properly saved to the host.

Ver.01.02 (2023/10/06)

1) Fixed a bug that prevented program changes from being executed immediately after startup.

Ver.01.01 (2023/09/28)

1) Fixed a problem in which patch data saved in the host was not reflected correctly.

Ver.01.00 (2022/10/16)

1) Adjust preset parameters.

2) Fixed a bug that caused division by zero.

Ver.00.03 (2022/08/25)

1) Add the presets.

Ver.00.02 (2022/08/17)

1) Changed the presets.

Ver.00.01 (2022/08/14)

Page updated

Google Sites

Report abuse