ttm003e(Master E)
The ttm003e is an effector designed to be inserted into the master track of a DAW to make final adjustments to the work.
It can perform independent equalization on Mid/Side separated audio signals as well as stereo audio on two tracks.
Apart from the equalizer, the DAW also includes a bit converter, a sampling rate converter, and a compressor with a proprietary algorithm.Control changes can also be used to create dynamic Lo-Fi sounds.
Latest version Ver.01.01:Download from KVR website
1) Fixed a problem in which patch data saved in the host was not reflected correctly.
Feature
Stereo audio, M/S processing, M/S separation, and stereoization of separated M/S signals are possible.
Independent 3-band equalization for two channels.
Bit and sampling rate converter functions.
Proprietary algorithm compressor.
Small memory usage and light load.
Parameter Description
Mode
Select from the following four modes.
Normal: Processes as stereo L/R signals.
M/S: Converts to Mid/Side signal, processes, and outputs back to stereo L/R signal.
to M/S: Converts to a Mid/Side signal, processes it, and outputs it as a Mid/Side signal.
from M/S: Converts the input Mid/Side signal, processes it, and converts it back to a stereo L/R signal for output.
Gain
Adjust the output gain between 0 and 400[%].
It can be controlled in real time with control change No. 20.
Conversion function
Bit: Adjusts the number of quantization bits (the absolute value of each positive and negative bit) between 1 and 12 [bit]. 12 disables the bit conversion function.It can be controlled in real time with control change No. 21.
Freq.: Adjust the sampling rate between 1 and 192 [kHz].Real-time control is available with control change No. 22: 1~120=1~120[kHz], 121=128[kHz], 122=136[kHz], 123=144[kHz], 124=152[kHz], 125=160[kHz], 126=176[kHz], and 127=192[kHz].
Auto gain
Delays the output signal by 1 to 100[ms], automatically suppressing audio waveforms that exceed 0[dB] during that time to 0[dB] or less. 0 disables this function.
Interpolation
Interpolates the result of the convert function to match the DAW settings; ON enables it, OFF disables it.
Option
P.Link: Link Mid(L) and Side(R) parameters so that they are always set to the same settings.
Bypass: Outputs audio without equalization or other effects.
Input
Gain: Adjusts the input gain between 0 and 400[%].Mid (L) can be controlled in real time with control change No. 23 and Side (R) with control change No. 24.
Comp: Adjusts the compression effect between 0 and 100[%].
Low shelf filter
Freq.: Adjusts the cutoff frequency between 10 and 1500[Hz].
Gain Adjusts the volume between -40 and +40[dB].
Peaking filter
Freq.: Adjust the center frequency between 10 and 20000[Hz].
Band: Adjusts the frequency range between 0.10 and 4.00[Oct].
Gain: Adjusts the volume between -40 and +40[dB].
High shelf filter
Freq.: Adjusts the cutoff frequency between 1000~20000[Hz].
Gain: Adjusts the volume between -40 and +40[dB].
Tips
Fine-tune the settings.
If you operate the GUI while holding down the Shift key, the amount of change in value is reduced to 1/5 of the normal value, making fine adjustments easier.