Fuel Pump-Engine Driven-Ceo

AMM Ref: 73-12-41

Consumables: As per AMM

1) LST, CFC & Rag pieces in bulk

2) Anti-seize

3) Seals

4) Locking wire (thick)

Tools:

1) Torque wrench # 200 in-lbs

2) Ring Ratchet Spanner # 1/4-5/16, 3/8-7/16

3) Twister

4) Tray & Jerrycan

5) Socket universal joint # 5/16

6) Spanners # 11/16 , 1"

7) Sockets # 1/4, 5/16, 3/8

8) Extension # 10" (qty-01) 1/4 drive

8) Common tools

Support Equipments:

1) Generator

Precautions/Tricks: As per AMM

1) Open both fan cowl , FMU is located on LH-Lower side.

2) Before removing any clitings (clips) or hardware , click the photos and put all hardwares with the respective lines, etc.

3) 2 bolts of LH side of FMU must be inserted before installation because of narrow space.

4) After removing FMU you will get access for Fuel pump.

Warning: Always use updated AMM/IPC,Task card, etc for performing any work on aircraft.