BSI-Ceo
AMM Ref: ..
Consumables: As per AMM
1) LST, CFC & Rag pieces
2) Anti-seize grease
3) Drive pad seal# qty-01 & Grommet# qty-01
4) Locking wire (thick)
Tools:
1) Torque wrench # 200 in-lbs # 75 ft-lbs
2) Igniter plug change kit
3) Guide tube-Ceo
4) C-duct pump & jack rod
5) Task card & Flap/slat lever (Zero) locking tool
6) Ratchets # 1/4 & 3/8 drive both
7) Extensions # 6" (1/4 & 3/8 drive both)
8) Sockets # 5/16 , 9/ 16
9) Common tools
Support Equipments:
1) Three Step Trestle
2) Generator
Precautions/Tricks: As per AMM
1) For getting access open Fan cowl & C-duct cowl both.
2) Clear communication is necessary between AME & Tech while turning drive pad like turn or stop otherwise Boro probe can be damage.
3) Port to be open: B3, B5, B6 (13/16) , HPT (5/16) & Drive-pad (5/16), Ignition B (use Igniter change kit).
Warning: Always use updated AMM / IPC,Task card, etc for performing any work on aircraft.