BSI-DFS (Neo)
AMM Ref: SI375F-18 (Special Instructions)
Consumables: As per AMM
1) LST , CFC & Rag pieces
2) Anti-seize
3) Developer
4) Paper tape
Tools:
1) Torque wrench # 200 in-lbs
2) BSI Guide tube # (Neo)
3) Universal joint socket # 5/16 # 1/4
4) C-duct pump & Flap/slat lever (Zero) locking tool
5) Sockets # 1/4 # 5/16
6) Ratchet # Extension # 10" (1/4 drive)
7) Spanners # 11/16
8) Common tools
Support Equipments:
1) Three Step Trestle
2) Generator
Precautions/Tricks: As per AMM
1) Open LH side C-duct cowl only.
2) Be cautious during removal & installation of Triangular metal seal, it's mounting bolts & other hardwares.
3) Warp the paper tape upon socket (5/16) & bolt head so that bolts can't drop into Engine.
4) During installation of mid clitings use universal (1/4) or remove the connectors.
4) Use proper light source.
Warning: Always use updated AMM/IPC,Task card, etc for performing any work on aircraft .