Radome

AMM Ref: 53-15-11

Consumables: As per AMM

1) LST & Rag pieces

2) Cotter pins

Tools:

1) Ring ratchet # 1/4-5/16 # 3/8-7/16

2) Torque wrench # 200 in-lbs

3) Spring weighing scale

4) Ratchet # Extension # (3/8 drive)

5) Spanners # 7/32, 1/4, 5/16 ...

6) Common tools

Support Equipments:

1) Radome trestle

2) Radome Hoist & Sling

Precautions/Tricks: As per AMM

1) Before performing job, ensure weather radar or any other radars must be in switch off position.

2) Be very cautious during removal and installation of Radome otherwise Weather radar/Glide slope antenna may be damage.

3) Telescopic rods must be disconnected only from Radome sides.

4) Note all Bolts and Spacers initial position.

Warning: Always use updated AMM / IPC,Task card, etc for performing any work on aircraft.