Secondary Panel
Secondary Panel
Embedded Files
SecondaryPanel (Touchscreen)
SecondaryPanel (Touchscreen)
SecondaryPanel (Analog) (Desktop or wall mounted)
SecondaryPanel (Analog) (Desktop or wall mounted)
Panel with kickstand out (Pop's out the back)
Panel Desktop Mount (USB to power)
Panel Wall Mount (wired to wall)
FAQ:
A Secondary Panel acts as an extension of the Main(Primary) panel
Will not play sounds (such as announcements) Only alarms
You can have up to 3 Secondary Panels per property
These panels are WiFi and not cell based (therefore WiFi-failures can cause these panels to go offline)
Secondary panels can have separate disarm codes. But most people use the same code for all panels.
Common Issues:
Issue: SecondaryPanel keeps dying when taken off the panel
Cause: Panel wires are possibly stretched way too far
Solution:
To a factory reset on the panel (not just a reboot)
Separate Partitions
Make sure the main panel stays labeled as Partition 1
Click Panel (Under peripherals)
Switch from Part 1 to Part 2 then save
Switch any sensors that want to run to this secondary panel in the same way
Learn in Secondary Panel
Same process as adding a peripheral device (make sure they pop-out the battery [similar to the d/w sensor])
Panel Mounting
A Plugged into side of panel
B Plugged into bottom of Desktop Mount
C Hardwired into outlet
Page updated
Google Sites
Report abuse