• Garage Door Opener KIT 

  • MyQ kit Internet system   [Kit= Tilt sensor + lift sensor]  (If you change WiFi it can knock the system offline)

  • ZWave kit Z-wave system [Kit= Tilt sensor + lift sensor]

  • Kit parts can not be sold separate they are part of a kit

  • Compatible Garage doors: Alladin, Genie, Chamberlain, Liftmaster.

  • GD00Z-2  9.4” x 7.2” x 4.6”  120 VAC, 50/60 Hz

  • Tilt sensor = 1 CR2032 coin cell battery 

• Overhead Garage Door Sensor

  • Sensor similar to the d/w just built different for the garage door, traditional package

  • Usually installed on the ground, but can be installed elsewhere (However the install requires drilling and this usually calls for a tech)

Issue:  Garage door opens or closes, but the status does not change on the touch screen or mobile app. 

Cause:   The Tilt Sensor signal is not being received by the Controller. 

Solution:

• • Check alignment

  • Replace tilt Battery