1/32 BOX Stock RevoSlot Rules

Revision date: 01.21.2024 

The goal of this class it to keep everything box stock for easy and tight racing.
You can modify the car/chassis by adding weight and foam donuts which can done at the track.

• RevoSlot GT2 Cars:

  • Marcos

  • Porsche 911 GT2

  • Dodge Viper

  • Toyota Supra

  • Ferrari F40

  • McLaren F1 GTR

  • Corvette C5

  • Porsche 911 GT1 is ok because it has a similar wheel base as the Marcos

  • Mercedes CLK is ok because it has a similar wheel base as the Marcos

• RevoSlot GT1 Cars:

  •  Toyota GT1

  • Mercedes CLK - The body on this car hangs much lower then the other cars.
    For this reason the body can have a MINIMUM of .015” clearance, measured under the front car. The car must sit on tires on tech block. (guide flag not touching) The gauge must slide under without lifting the body from tech block.

  • Porsche 911 GT1

• Front chassis and body must have a MINIMUM of .050” clearance, measured under the entire car. The car must sit on tires on tech block. (guide flag not touching) gauge must slide under without lifting front tires from tech block.

• Rear chassis and body must have a MINIMUM of .065” clearance, measured under the rear axle while the car sits on tires on tech block. (guide flag not touching) gauge must slide under without lifting rear tires from tech block.

• Rear wheel track width = 2.55” max

• Guide Flag: You can use either but the deep guide would be a better choice

• Driver: Stock interior

• Motor: Box Stock

• Gears: Box Stock Ratio

• Front Tires: Stock rubber or foam 

• Rear Tires: ONLY RS-204w Sponge Tires WIDE for RS-128 wheels.