Embedded Files
URL link to this web page ==> Winterization and storagePolaris Winterization Procedures(PWC Team Tip vol 10, number 11)Winterizing Overview, Additional linksWinterizing-Here's howWinterizing comments
Tuned exhaust pipes must be properly drained
(additional drain procedure for early year Fuji engines with water cooled crankcase
1992 Polaris SL650's through serial number PLE 04038D292
Cooling hose routing Service Bulletin (PWC-92-06 ???)
If you must use anti-freeze, use only Propylene glycol
Do not use alcohol or automotive Ethylene glycol anti-freeze
Polaris Engine Fogging Kits, using liquid fogging oil
Winterizing carb engines; using the Polaris engine fogging kits 2872635, 2871480, etc
Protecting the engine exterior, clearing exhaust waterbox, draining hull
Starting engine in Spring, burning off the fogging oil
What protectant should I use to spray on the engine exterior and other metal parts inside the hull?
Note: Do not use WD-40 or any solvent based product. WD-40 is not effective for protecting metal.
Solvent based products can attack rubber parts, flexible hoses and wire insulation and over time can cause them to degrade. If you can, look for Low VOC or non-VOC products.
Never spray these products inside the engine. Use engine fogging oil to protect the engine internals.
Store with full fuel tank (with fuel stabilizer), ventilate hull interior
Storage with non-Ethanol gasoline preferred
Nose high draining, especially for Ficht fuel injected engines
Drains water from flywheel cover, EMM water cooling hoses
MSX 150 and MSX 110 Winterizing / Storage instructions
2004 Polaris MSX owner's manual - storage
Winterizing a non-running engine
What to do if you forgot to winterize before it got cold
Battery maintaining, empty vs full fuel tank storage
Page updated
Google Sites
Report abuse