Embedded Files
Alternate Polaris OEM jet pump parts source (Weber)
Weber now has rights to the Polaris jet pump design, and makes a number of parts that are direct replacements for Polaris 148mm modular jet pump parts.Note: These Weber to Polaris equivalent part numbers may not be 100% accurate, do your own checkingDrive shaft PTO Coupler (Weber 103421, replaces Polaris rubber bonded coupler 1013544, 1060119) Complete through-hull bearing assembly (Weber 402423, replaces Polaris 1341145)
Through-hull replacement seals+bushings kit (Weber 103690) (these are for non-MSX Polaris hulls)
Pump Stator (Weber 103420, equivalent to Polaris SS 6 vane stator 5132088)Jet Pump Stator bearing+seals Repair Kit (Weber 103688)Stator Stub Shaft (Weber 103418, equivalent to standard Polaris stub shaft, not hardened)Stator internal Bearing Spacer (103430, Polaris 5010294)Impeller spacer (Weber 103429, Polaris 5010295)Ring gasket between pump sections (Weber 403454) Note: Randy says this gasket can be retro-fitted to seal the rim area between OEM/original Polaris pump sections. This should reduce the possibility of jet pump ventilation (air leaks) which can reduce acceleration from low speeds.
Stator Tail cone (Weber 103491, Polaris 5431519)
Tail cone O-ring (included in Weber repair kit 103688, Polaris 5410819)
Tail cone flat rubber gasket seal (Weber 103496, Polaris 5811984)
Note: This tail cone seal can be retro fitted to all Polaris 148mm modular jet pumps
Water cooling tube O-ring at pump nozzle end (Weber 103425, Polaris 5410735)
Sacrificial Zinc anode replacement (Weber kit 103689, Polaris anode 5630598 + 7522019 bolt)
Jet pump plastic mesh screen inside nozzle for cooling water Inlet (Weber 103492, Polaris 5431523)
Weber steering nozzle 401302
Nozzle bushings, bolts and many other small parts
Impeller removal tool (Weber 104361), Impeller removal tool PT-001
Weber impeller pitches; Weber 403172 (rated 60-95HP), 103729 (rated 95-125HP), 103435 (rated 125+ HP)
Jet pump base (wear ring on non-extended Polaris jet pumps) Weber 402174Apparently this is equivalent to Polaris 5131574, including the Stainless Steel liner. Should also be workable as replacement for any other 148mm modular jet pump base (5131573, 5131310, 2873081).Hull mounting studs (Polaris 5132111), bilge siphon tube fittings (Polaris 5431990) and sacrificial zinc anode (Polaris 5630598) sold separately.Note: All Weber brand jet pumps appear to be non-extended, so there is no extension ring or other equivalent 'long pump' partsNote: Some of the Weber jet pump parts are not related to the Polaris jet pumps, so don't get confused. In particular, the 402809 Damping Bearing is not used on any Polaris model.Weber jet pump parts sources
Contact Randy at WeberPower to see what Weber jet pump parts are available for your Polaris.
Page updated
Google Sites
Report abuse