Control
Mode Dial - iAuto
Mode Dial - SCENE
Fn 1 Button
REC Button
AEL / AFL Button
Fn 2 Button
Upper Front Button
Lower Front Button
B-Fn1
B-Fn2
Back Dial
Front Dial
Arrow Cursor Pad on the back
OK button
Info button
Set 2x2 Lever to Position 1
How To Use
Twirl to iAuto whenever you want to recall My Settings 2 - you can still change settings but they are volatile and will revert when you switch On/Off/On
Twirl to SCENE whenever you want to recall My Settings 4 - you can still change settings but they are volatile and will revert when you switch On/Off/On
Tap once to activate.
Tap again to de-activate
In Manual Focus mode, activates Single Auto Focus.
In Single AF mode, activates Auto Exposure Lock
In Continuous AF mode, activates AF Start (used for Back Button Focus with the 2x2 lever in the down position
Press and hold, then twirl Front Dial to select the parameter you want to adjust
Tap to activate
Tap again to de-activate
Rotate
Rotate
Tap
Tap
Tap Top-Left-Front Button
Tap Top-Left Back Button
Tap Top-Left-Front Button
Tap - On
Tap - Off
Tap Top-Left Back Button
Assignment
My Settings 2 - for general use and portraits
My Settings 4
Toggle Home AF point position
Movie REC
AEL/AFL
Context - S1/C4/M3
Multi-Function
Highlight / Shadow Control
Color Creator
Magnify
Aspect Ratio
Toggle Peaking On/Off
DOF Preview with Hold
AEL/AFL
AF Area Selection
P Mode - Program Shift
A Mode - change f/no
S Mode - change shutter speed
M Mode - change f/no
Change Exposure Compensation in P A and S. For M, change Shutter Speed
Set 2x2 Lever to Position 1
Set 2x2 Lever to Position 2
Set 2x2 Lever to Position 2
Cog B > Lever Function> Mode 5
In different Modes:
Super Control Panel
Terminates Magnify
When held down for a couple of breaths, resets Highlight/Shadow, Color Creator degree.
In Art Scene or Scene or Frames Mode, brings up the menu - then use the Cursor Pad to choose
Whenever you are looking at a menu or dialog screen and suspect there is an additional screen of settings, press the Info button
Front Dial – Select HDR options
Back Dial – Select Single Shot / Sequence / Timer options
Assumes Cog B > Lever 2 > On
Front Dial – Select Metering Options
Back Dial – Select AF Options
Assumes Cog B > Lever 2 > On
Switches on Bracketing
Assumes Cog B > Lever 2 > On
Front Dial – Vary Flash Compensation
Back Dial – Select Flash Trigger Type
Assumes Cog B > Lever 2 > On
Moving the 2x2 Lever from Position 1 to Position 2 changes the AF mode from S-AF to C-AF with back button >focus activation
In any position other than Off on the Front Dial Menu, Back Dial is locked and set to (H) Sequential Shooting.
When the Front Dial Menu is set to Off, the Back Dial and the Cursor Pad will allow choice of Single / Sequential / Timer options.