Behringer Xenyx 1204

A mixer of this type got bad faders with unreliable connections. So it was dismantled, the bad faders taken out and a bypass link was put in their place as a quick fix without the use of spare parts. It works without the master faders now, which is doable when only 1 or 2 source are turnd up at a time, and there are gain knobs on the following amplifier within reach.

Photos are in the album at https://photos.app.goo.gl/Pw9BW6k9jpJabhsP8 .

Tip for dismantling: The PSU is attached to the bottom, so unscrew the power section from the back casing (2 screws above IEC sockets).