Synergy Deca 1 Construction

These are my interpretations of the parts of the Deca 1 kite - I have since acquired a copy of the manual and renamed the spars according to the Guildworks naming.

Pictures

Labeled Front view of the Deca 1

Labelled Right wing front view

Labelled left wing top view

Diagrams

Diagram - Deca 1 Bridles and Spars - Top View

Diagram - Deca 1 Bridles and Spars - Front View

Notes:

Not to scale!
Only the left tip is shown (hence the 'L' after the letter).
Bridles are shown in Magenta - if a bridle passes behind anything else it's shown as dotted.
Spar AL-BL: Wing Spar (marked Silver on the end caps & spars)
Spar EL-FL: Vertical Spar
Spar CL-DL: Main Left Bow Spar (marked Gold on the end caps &spars)
Spar DL-DR (not shown):Main Central Bow Spar (again marked gold)

Fittings

Ferule : 10 cm 6.35 mm (internal diameter) (x2)
6.0 mm End Caps : 6.0 mm (int) (x8)
6.35 mm End Caps : 6.35 mm (int) (x2)
Bridle Attachment : 6.35 mm (int) (x2)
Stopper : 6.35 mm (int) (x2)

Spar Sizes

These are the measurements I took of the Deca 1 spars.

Wing Spar (A-B) : 83 cm 6 mm diameter Carbon (x2)
Main Bow Central DL-DL* : 73 cm 6 mm diameter Carbon (x1)
Main Bow Left & Right C-D : 73 cm 6.35 mm diameter Carbon (x2)
Vertical Spar Left & Right E-F : 51.5 cm 6 mm diameter Carbon (x2)

* I suspect that this section should also be 73 cm, 6.35 mm carbon fibre

Bridle Measurements

A-C 58 cm
A-D 89 cm
B-C 36 cm
B-E 28 cm
B-F 28 cm
C-E 46 cm
D-E 30 cm
D-F 57 cm