Synergy Deca A1 Construction

These are my measurements of the parts in the Synergy Deca A1 kite. This kite was second hand so the measurements might be a little bit 'out' especially for the bridles.

Pictures

Diagrams

Notes:

• Not to scale!
• Only the left tip is shown (hence the 'L' after the letter).
• Bridles are shown in purple - if a bridle passes behind anything else it's shown as dotted.
• Spar AL-BL: Wing Spar (marked Silver on the end caps & spars)
• Spar EL-FL: Vertical Spar
• Spar CL-DL: Main Left Bow Spar (marked Gold on the end caps &spars)
• Spar DL-DR (not shown):Main Central Bow Spar (again marked gold)

Spar Sizes

These are the measurements I took of the Deca A1 spars.

• Wing Spar A-B (Silver) : 50.7 cm (Avia Sport .180) 6 mm diameter Carbon (x2)
• Main Bow Central DL-DR (Gold) : 41 cm (Wrapped) 8 mm diameter Carbon (x1)
• Main Bow Left & Right C-D (Gold) : 72.3 cm 5.5 mm diameter Carbon (x2)
• Vertical Spar Left & Right E-F : 34.8 cm (Avia Sport) 8 mm diameter Carbon (x2)

Bridles

• Rear A - D : 66n cm (x2)
• Front A - C : 35 cm (x2)
• Front B - C : 20 cm (x2)
• Front B - E : 18 cm (x2)
• Front B - F : 20 cm (x2)
• Front C - E : 26.5 cm (x2)
• Rear D - E : 27 cm (x2)
• Rear D - F : 40 cm (x2)