13-05 Engine Assembly

I'm putting together the remaining engine components to get the car fired up. This includes connecting the fuel lines, attaching the wiring, locating a belt, connect air intake (with MAF), etc.

I cut the fuel line to attache the AN fuel fitting

This is the fuel line attached to the rails.

To improve the look of the wire routing I drilled 1" holes through intake manifold to run the coil and injector wires.

This is the default routing for the belt. I removed the power steering pump so I needed to get a shorter belt. I measure the distance using the old to determine the length and then bought a 900K6 sized belt

Here are the wires on the passenger side.

Page updated

Google Sites

Report abuse