Embedded Files
Compentnz accredited qualification - see www.competenz.org.nz for apprenticeships and employment opportunities.
Safe use of a hacksaw Task - make your own slide for safe use of a hacksaw add your notes here.
TO ACHIEVE THE UNIT STANDARD 32053 WORTH 7 CREDITS :
TO ACHIEVE THE UNIT STANDARD 32053 WORTH 7 CREDITS :
YOU HAVE TO COMPLETE THE THEORY AND PRACTICAL ASSESSMENT GUIDES.
YOU HAVE TO COMPLETE THE THEORY AND PRACTICAL ASSESSMENT GUIDES.
THIS PAGE COVERS THE PRACTICAL ASSESSMENT
THIS PAGE COVERS THE PRACTICAL ASSESSMENT
For the theory assessment and webpage use the drop down at the top of the screen
LEARN - AKO.
LEARN - AKO.
This learning package covers the requirements for the following Competenz Assessment
Demonstrate knowledge of and apply good work practices when performing machining operations in manufacturing pathway skills environment (MaPS)
US 32053 v1 Level 2 Credits 7
https://www.nzqa.govt.nz/nqfdocs/units/pdf/32053.pdf
For more information on COMPETENZ and starting an apprenticeship follow this link https://www.competenz.org.nz
This unit standard has been designed for secondary school learners in a manufacturing pathway skills (MaPS) programme.
People credited with this unit standard are able to
: demonstrate knowledge of machines and machine components
; demonstrate knowledge of machining principles
; demonstrate knowledge of cutting tools
; apply good work practices when performing machining operations
; apply good work practices when completing machining operations.
CREATE - WAIHANGA.
CREATE - WAIHANGA.
You will be manufacturing an gear knob for your manufacturing project
You will be manufacturing an gear knob for your manufacturing project
You will need to demonstrate you can safely and effectively put into practice the following skills :
You will need to demonstrate you can safely and effectively put into practice the following skills :
» Measuring and marking out the components.
» Machining the components.
» Safely using and assortment of machining equipment and tools.
» Assembling and securing the components.
You will need to demonstrate safe working practices in a workshop .
You will need to demonstrate safe working practices in a workshop .
This includes use and safe operation of the following machinery and equipment :
This includes use and safe operation of the following machinery and equipment :
o Measuring equipment
o Marking out equipment
o Manually controlled lathe
o Manually controlled milling machine
o Hand tools.
o Understood the hazards present in an engineering workshop.
o Used all equipment safely.
o Worn the correct PPE.
o Selected and used the correct tools and equipment.
o Carried out before use equipment checks and reported any faults.
o Carried out final work operations.
o Understood and interpreted the job specifications and drawings and manufactured the items correctly and to the specifications required in the project drawings.
You will need to be observed and complete all of the following operations :
You will need to be observed and complete all of the following operations :
Mark out the components using the drawings provided.
Manufacture the major components from materials supplied by the tutor.
Use two different materials.
Machining ranges (any 2 of – drill press, lathe, milling machine):
Drilling – a minimum of two different sized holes between 3 mm and 20 mm.
Turning – must include turning diameter and turning length, and any 2 of – taper turning using compound slide, cutting grooves, drilling, parting off.
Milling – any 3 of – slotting, drilling, facing, end milling.
(Machining tolerances using mill or lathe – diameter ±0.2 mm, linear ±0.5 mm)
Assemble the components using mechanical fixing techniques.
Apply good work practices when carrying out these tasks.
o Understand and interpret the job specifications and drawings and manufacture the project correctly and to the specifications required in the project drawings.
o Understand the hazards present in an engineering workshop.
o Use all equipment safely.
o Wear the correct PPE.
o Select and use the correct tools.
Carry out final work operations.
To be considered for an achieved your completed project must:
To be considered for an achieved your completed project must:
- Complete the project in the time allowed using the project drawings provided and the materials specified in the drawings.
- Meet the measurement and material specifications contained in the project drawings,(Machining tolerances using mill or lathe – diameter ±0.2 mm, linear ±0.5 mm)
- Be fit for purpose,
- Be of an acceptable quality with any variations within the acceptable allowance as stated on the project drawings.
When you have finished your Gear Knob
When you have finished your Gear Knob
Complete the Assessment Guide and hand in for assessement.
Complete the Assessment Guide and hand in for assessement.
ATTACH 3 PHOTOGRAPHS OF YOUR FINISHED PROJECT ONTO THE SPREADSHEET BELOW - USE THIS LINK
ATTACH 3 PHOTOGRAPHS OF YOUR FINISHED PROJECT ONTO THE SPREADSHEET BELOW - USE THIS LINK
2024 L2 Engineering Practical assessment .pdfShare
Share
You will need to share your evidence for assessment.
COMPLETE THE TRACKING SHEET BELOW WITH DATE COMPLETED
Resources
Resources
Support Booklets for above unit standards - The answers are in here !!
Support Booklets for above unit standards - The answers are in here !!
2020 Student Safety and Engineering Hygine.pdfSafety and Engineering
2020 Student Engineering Drawing.pdfEngineering Drawing
2020 Student Machinery.pdfMachining
2020 Student Fabrication.pdfFabrication
2020 Student Materials.pdfMaterials
Materials
2020 Student Fastners.pdfFasteners
Fasteners
StudentGuide_L2_WK_ED01_SC-Engineering.pdfWhole Booklet
Whole Booklet
Resources
Resources
End Milling
Report abuse