VIP RS3200 (~2000-2008)

Toyota VIP RS3200 Remote Keyless Security System

There were a few factors that determined whether vehicles got the standard VIP RS3200 , the VIP RS3200 Plus, or the VIP GBS accessory:

• If the vehicle did not come from the factory with keyless entry, then the standard VIP RS3200 could be installed at the port or the dealer.  

• If the vehicle came with factory keyless entry, then it could be upgraded with the VIP RS3200 Plus.

• If the vehicle came with a factory theft deterrent system, then it could be upgraded with the VIP Glass Breakage Sensor. 

This page covers the port-installed VIP RS3200. 

Similar to past VIP Systems, the VIP RS3200 has several characteristics that can help you identify it. 

The front driver and passenger window sticker remains the same:

Although an uncommon occurrence, some owners of these Toyota vehicles will remove the stickers on purpose, typically for installing window tint. 

In that case, there is one interior feature that is certain to confirm that you have the RS3200-  the status indicator/glass breakage sensor or standalone glass breakage sensor:

The remote fob transmitters look like this:

The VIP RS3200 is programmed using a series of steps involving the ignition and driver's door.

PROGRAMMING MODE OVERVIEW:

• Add

• Rewrite

• Confirmation (not covered below)

• Prohibition (not covered below)

• Clear (not covered below)

ENTERING PROGRAMMING MODE (A):

1. Unlock and open the driver's door.

2. Insert and remove the key from the ignition 2 times. 

3. Close then open the driver's door 2 times.

4. Insert and remove the key from the ignition 1 time. 

5. Close then open the driver's door 2 times.

6. Insert the key into the ignition and leave it in. 

7. Close the driver's door. 

8. Turn the key from LOCK to ON, and then back to LOCK (1 time for ADD, 2 times for REWRITE). 

9. Remove the key from the ignition.

10. The locks should cycle, piezo chirp, and parking lights flash (1 time for ADD, 2 times for REWRITE). 

11. You are now in the selected mode. 

ADDING NEW REMOTES or REWRITING EXISTING REMOTES (continued from A):

12. Press and release the both LOCK and UNLOCK buttons at the same time once.

13. Press and release the LOCK button once.

14. The locks cycle once, the piezo chirps once, and the lights flash once. 

15. You have now programmed that remote. Repeat steps 13 and 14 to program more remotes. 

16. Open the driver's door to test your new remotes. 

For more information, refer to the Toyota VIP RS3200 owner's guide and programming manual: