3D Print Projects (Projects That Need A Team)

Web Site: WWW.STEAMCLOWN.ORG | Contact: TopClown@STEAMClown.org | LinkedIn: Jim Burnham | TikTok: STEAM Clown

Consider Supporting my Open Source STEAM Curriculum Development -- Patrion: Jim The STEAM Clown | Amazon: Amazon Classroom Wishlist,

WORK IN PROGRESS

Pick a Project... Maybe Extra Credit

Arduino Board breadboard bracket - This is a small bracket to hold the large breadboards on the class Arduino boards. Come talk to me
Question cup holders... maybe 2 types... 1 for laptops and the other for Monitors when we have the RPi out. Come talk to me

Sponsor Shout Out

I would like to thank <Your Company or Organization Here> for their generous support of my classroom and curriculum development. <Your Company or Organization Here> has <Your value proposition, call to action, & related content and message>

(If you would like to sponsor this, or other Modules or presentation, please contact TopClown@STEAMClown.org or check out my "How To Help Page"

If you would like to sponsor other Curriculum Development, check out my "How To Help Page" or contact TopClown@STEAMClown.org

Caution & Safety Considerations:

Primer: "Aaron, I can imagine no way in which this thing could be considered anywhere remotely close to safe. All I know is I spent six hours in there and I'm still alive... You still want to do it?"

As with any activity, please make sure you are using appropriate safety equipment. If you are coding, writing, reading, or working a lab, make sure you stand up and stretch every hour or so, Please consider any safety issues connecting to a Raspberry Pi, Arduino, computers and other electronic equipment.

Unit Topics and Lessons

Small, Quick, Projects

wall clip to hold a ethernet cable

I have a few motors, like the Shadow Box motors that I want horns for. Check with Teacher or Sub

Motor "Horns"

I have a few motors, like the Shadow Box motors that I want horns for. Check with Teacher or Sub

Scissor - Fix my broken Scissors

I a few scissors that have broken handles... 3D print a new handle

Mechatronics Letters

Ask me about the Mechatronics letters I want. I want letters to spell MECHATRONICS ENGINEERING.
The "capital" letters M and E should be 6 cm tall, and the other letters (still capital) should be 4 cm
add some steam punk "bling" to the letters.
Large Capital M = 80mm tall
small capital letters = 60mm tall

Replacement Plastic Drawers

Talk to me. I have replacement drawers I need

More Complex Projects

Rover Plate Stand Off Hinge

Small hinge to let a rover plate be lifted up

Battery AC/DC Lab base (bat & breadboard)

Small plate for holding battery case & breadboards

Battery Rover Mount

Small plate for holding battery case that will land on a rover plate

Bread Board Power Adaptor Box.

Small box with an holes for female adaptor, with holes for 22 gauge bread board wide about 30 20 cm long... but also have an LED to indicate power. have a 560 ohm and LED (this lets it be 9 mA at 5 v, and 42mA at 24v. Also we could put a pin plug for testing an LED.

Most Complex Projects

Track Switcher with a Pan/Tilt to move switch

Build This? Pan/tilt that will tip down with something like a chop stick and be able to swing the switch left or right, and then lift to be out of the way of a car that drive in or out of the switch track. the car needs to be able to push the switch if it's coming out of the switch track, so the pan /tilt can't hod the switch static.

Zoe-Trope

I want to build a Zoe-trope. I want to build a slit zoe-trope, where we 3D print 20+ characters and with small magnets in their base, put this on the zoe-trop plate to create a cool animation effect. Here are a bunch of links

LeKiwi

LeKiwi 3 Wheeled Robot/Rover <-- Ethan in PM might lead a PM team, but AM could put a team together. Start reviewing the Github site. Maybe don't print stuff yet... lets wait till Monday.. but you can research to files, and the code, and other tools. longer term, this is a ROS project... but short term it could be an Arduino project. What motors do they recommend?

Build This? LeKiwi 3 Wheeled Robot/Rover

Cricket Drive Robot Arm - Servos?

Redesign this with full side "regular" Servos rather than Steppers

Build This? https://www.tiktok.com/t/ZP8Aw67Es/

ISS Model

Print a ISS model

Build This? https://www.thingiverse.com/thing:4293302

Marble Works stuff

Talk to me. I want to make a marble works wall.
but here is a starting point, because I want to print some of these. I'll be getting the magnets soon.
https://www.trackstacker.net/build

Replacement Plastic Organizer Trays

Talk to me. I have replacement trays I need

Done:

(DONE) 3D Print Hole Size Template (sized by .1 mm)

Create an STL file for a sizing guage, for what a correct size for a hole should be where you print a 3mm hole, and then have 3.1, 3.2, 3.3, 3.4, 3.5 3.6, 3.7, 3.8, 3.9
and then do it again for 4mm with 4.0, 4.1, 4.2...

(DONE) Napkin Holder for the Office Door

Talk to me. I need a napkin holder to attach to my office door

Reference, Attribution & Resources:

License - "Be A Hero"... Distribute Your Content As Open Source... That Is What I'm Doing...

The content on this site may have been pulled from other open source sites, but typically the interpretation and presentation is primarily the Intellectual Property of Jim Burnham, - TopClown@STEAMClown.org at www.steamclown.org and the Student curriculum can be found under the specific Mechatronics Engineering Units section of this web site.
If you do use my material, and make changes, I would appreciate getting a copy... because if you are making changes, it means that you think there is a better way to teach this… and I would really appreciate understanding that. Please send me feedback on my Questions or Feedback form. Please don’t hesitate to ask questions or comment.
You also should keep and include my STEAM Clown Logo and Copyright in any derivative works you create. I would appreciate if you would include one of these images found on my Steam Clown License page and link it to www.steamclown.org

Teachers - Unit, Module and Lesson Plans

If you are a teacher and want to connect and teach this Lesson or Module, discuss how I teach it, give me feedback, please contact me at TopClown@STEAMClown.org

To access this Lesson Plan and the Teacher collaboration area, you will have needed to connect with me so I can Share the content with you. Please go to the Teachers & Partner Page, check out my Licensing and fill out my Collaboration and Curriculum Request Form. I'll review and then grant you access to the requested areas and lesson plans if they exist.

If you have questions or feedback on how I can make a presentation, lesson, lab better please give use my Feedback Form.

Standards Alignments & Objectives:

I’ll work on getting these in, but it’s the last thing I want to work on :-) When I have them updated, I’ll move to the top of the Lesson Plan.

NGSS: <list standard numbers>
California CTE Standards: <list standard numbers>
Related Instructional Objectives (SWBAT): <list standard numbers>
CCSS: nnn, RSIT: nnn, RLST: nnn, WS: nnn, WHSST: nnn, A-CED: nnn, ETS: nnn <list standard numbers>
Main Standard:
Priority standards:
National Standards:

Resource Attribution:
Sites Referenced or Summarized:

Reference Text Book - Basic College Mathematics with Early Integers 4th edition - Elayn Martin-Gay - University of New Orleans - Pearson
Reference Sites -

Images:

https://imgbin.com/png/ZJtzkYZZ/under-construction-png

Random Stuff To Sort

Page updated

Google Sites

Report abuse