Brothers printer: error message “unable to clean”
Pull out the AC plug.
Put back the AC plug while holding down the "Menu" button and keep holding it (15 sec):
you're entering the Maintenance mode and "error 46" pops up in the display.
Select 8 by using the arrow buttons, push "OK" and select "0" and push "OK"
Message 00:00 00:01 OK appears.
Push the "Mono" button 25 times until you see PURGE: xxxxx
Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
Purge counter indicates: purge: 00000
Switch off the printer, switch it on.
Press the 8 then 0 keys. It will call up the machine’s log information list;
With the Arrow keys we scroll through the log information list to reach the purge counter;
Press the 2, 7, 8, and 3 keys in this order to reset the purge count to zero;
Press the Stop/Exit key to return to the initial stage of the maintenance mode;
Press the 9 key twice to return to the standby state.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------