Embedded Files
Instructions: For this project, you will be modeling the spinner handle for the battle spinner project!
Rubric:
4pts Blueprint - Blue print of Spinner Handle with the four dimensions shown on the example below.
4pts 3D Print - Photograph of 3D printed object is taken on a clean background.
2pts Mastery - Spinner handle has FILLETED EDGES & NAME on the handle.
-----
10pts Total
What you need to submit:
1 Blueprint of Spinner Handle + 1 Picture of 3D Printed Spinner Handle
Instructions
Instructions
2021-12-12_21-24-32.mp4Model Handle
Model Handle
Watch the video to see how to 3D model the handle we will use for our battle spinners.
2021-12-12_21-32-18.mp4Mastery Fillet
Mastery Fillet
Fillet edges!
The fillet command will add a rounded edge to the object. You can fillet your edges with any number. You are not limited to the fillet I used in the example.
2021-12-12_21-33-25.mp4Mastery Name
Mastery Name
Add your name or initials to the handle.
In this example I add my name in subtract mode but you are welcome to add your name in the add mode.
Blueprint
Blueprint
When you are finished, create a blueprint of your object.
You will need to put 5 dimensions on your blueprint as shown in the example.
3D Print
3D Print
Print your Handle!
It is my recommendation that you print your handle with a high infill because this will be a part that has a lot of wear and stress put on it.
Page updated
Report abuse