Slice this Model with
Layout - Print this object in an orientation where supports will NOT touch the face or the top of the shoulders.
Printer Profile - Use the PBHS recommended
Slicing Profile - Use the PBHS recommended
Supports - This print has overhangs
Adhesion - This print has no special concerns (don't waste material).
Layer Height - Print this file with high detail but DO NOT EXCEED 4.5 hours for the total print time
Density - This is a decorative print
Slide this Model with
Layout - The legs on this model will break if printed standing up on its feet.
Printer Profile - Use the PBHS recommended
Slicing Profile - Use the PBHS recommended
Supports - This print has overhangs
Adhesion - This print has no special concerns (don't waste material).
Layer Height - This is a test print, print this with the fastest option.
Density - This is a decorative print
Slice this Model with
Layout - Print this object so there are NO supports on the sides of the object
Printer Profile - Use the PBHS recommended
Slicing Profile - Use the PBHS recommended
Supports - This print has short overhangs, do not use supports.
Adhesion - This print has no special concerns (don't waste material).
Layer Height - Do NOT print this at the highest detail.
Density - This is a decorative print
Slide this Model with
Layout - Print this object upright so the feet are touching the build plate
Printer Profile - Use the PBHS recommended
Slicing Profile - Use the PBHS recommended
Supports - This print needs supports
Adhesion - Adhesion method to stop the toes from peeling but does not waste more material then necessary
Layer Height - Print this file with medium detail.
Density - This is a decorative print
Slice this Model with
Layout - Rotate the object so the TAIL has the most strength!
Printer Profile - Use the PBHS recommended
Slicing Profile - Use the PBHS recommended
Supports - This print needs supports
Adhesion - This print has difficulty sticking, use the setting that uses the most material but ensures the best adhesion.
Layer Height - Print this file with the highest detail
Density - Print this object with the highest recommended infill
Instructions: For this assignment, you will practice preparing files for 3D printing using the slicing software 3D Printer OS.
Only the 1st print has an instruction video Do your best to slice the files with the given information.
No title blocks are required for this assignment.
Use the slideshow on the printer guide that shows the recommended slicing settings! LINK
EACH SLICE EXAMPLE REQUIRES YOUR TOKEN!
Rubric:
2pts each Landon, Mercurio, Egg, Frog, and Mew*
*Each screenshot includes the following requirements!
Slice preview meets the requirements in the description
Screenshot includes YOUR TOKEN
Screenshot shows the infill of the object
Screenshot shows the "INFO" tab