Embedded Files
🏰 Challenge 1: Castel Nuovo - Maschio Angioino (Naples)
🏰 Challenge 1: Castel Nuovo - Maschio Angioino (Naples)
Description: This medieval castle is the main symbol of Naples. It is famous for its five huge round towers and its impressive white marble triumphal arch at the entrance.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Towers (Las Torres): Use 3 or 4 large Cylinders. Make them tall and dark grey. (Usa 3 o 4 cilindros grandes. Hazlos altos y de color gris oscuro).
The Battlements (Almenas): Place small Boxes around the top of the towers to create the castle teeth. (Coloca cubos pequeños alrededor de la parte superior para hacer las almenas).
The White Arch (El Arco de Mármol): Use a Box and a Round Roof (Hole) between two towers to represent the famous entrance. Use white color for this part! (Usa un cubo y un techo redondo —hueco— entre dos torres para representar la entrada. ¡Usa el color blanco!)
🏛️ Challenge 2: Temple of Concord (Sicily)
🏛️ Challenge 2: Temple of Concord (Sicily)
Description: Located in the Valley of the Temples in Agrigento, this is one of the best-preserved Greek temples in the world. It is a masterpiece of ancient architecture.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Base (La Base): Create a rectangular base using a flat Box. (Crea una base rectangular usando un cubo aplanado).
The Columns (Las Columnas): Use thin Cylinders. Place them in a row (6 on the front, 13 on the sides). Tip: Use Duplicate (Ctrl+D) to place them quickly! (Usa cilindros finos. Ponlos en fila: 6 delante y 13 en los lados. ¡Usa el atajo duplicar!)
The Roof (El Tejado): Use a Roof shape (triangular) and stretch it to cover all the columns. (Usa la forma "Techo" —triangular— y estírala para cubrir todas las columnas).
Color: Use "Orange" or "Yellow" to mimic the golden sandstone of Sicily. (Usa naranja o amarillo para imitar el color de la piedra siciliana).
🇮🇹 Challenge 3: The Colosseum (Rome)
🇮🇹 Challenge 3: The Colosseum (Rome)
Description: Il Colosseo is the largest ancient amphitheatre ever built. It is a symbol of the Roman Empire and one of the New Seven Wonders of the World. It is famous for its circular shape and many arches.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Main Walls (Los Muros): Use a large Cylinder. Make it flat and wide. Then, use a slightly smaller Hole Cylinder in the middle to create the ring shape. (Usa un cilindro grande, hazlo plano y ancho. Luego, usa un cilindro hueco un poco más pequeño en el centro para crear la forma de anillo).
The Arches (Los Arcos): Use a Box and a Round Roof (as a hole) to create a small arch. Duplicate it many times around the walls. (Usa un cubo y un techo curvo —como hueco— para crear un pequeño arco. Duplícalo muchas veces alrededor de los muros).
The Interior (El Interior): Use small Boxes to create the ruins of the seating area inside. (Usa cubos pequeños para crear las ruinas de las gradas en el interior).
Color: Use a "Beige" or "Tan" color to match the ancient stone. (Usa un color beige o arena para que coincida con la piedra antigua).
🇮🇹 Challenge 4: Leaning Tower of Pisa (Pisa)
🇮🇹 Challenge 4: Leaning Tower of Pisa (Pisa)
Description: The Torre di Pisa is famous worldwide for its unintended tilt to one side. It is a bell tower made of white marble with many beautiful columns.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Base and Bodies (Cuerpo de la Torre): Create a stack of 6 or 7 Cylinders. Each one should have a slightly wider ring at the top and bottom. (Crea una pila de 6 o 7 cilindros. Cada uno debe tener un anillo un poco más ancho arriba y abajo).
The Columns (Las Columnas): Place very thin Cylinders all around each level to represent the marble columns. Use the Duplicate (Ctrl+D) tool! (Coloca cilindros muy finos alrededor de cada nivel para representar las columnas de mármol. ¡Usa la herramienta Duplicar!)
The Bell Chamber (El Campanario): Add a smaller Cylinder at the very top for the bells. (Añade un cilindro más pequeño arriba del todo para las campanas).
The Tilt (La Inclinación): This is the PRO step! Group all the pieces together. Then, use the Rotation tool to tilt the tower about 4 degrees. (¡Este es el paso PRO! Agrupa todas las piezas. Luego, usa la herramienta de rotación para inclinar la torre unos 4 grados).
Color: Use "White" or "Ivory" for the marble. (Usa blanco o marfil para el mármol).
🗼 Challenge: Ejer Bavnehøj Tower (Skanderborg)
🗼 Challenge: Ejer Bavnehøj Tower (Skanderborg)
🇪🇸 🇬🇧
Description: This tower was built in 1924 to celebrate the highest point in Denmark and national unity. It is a brick tower with a very rectangular and sturdy design.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Main Tower (La Torre Principal): Use a tall Box as the main body. (Usa un cubo alto para el cuerpo principal).
The Observation Deck (El Mirador): Place a wider but flat Box on top of the tower. This will be the floor of the balcony. (Coloca un cubo más ancho pero plano encima de la torre para hacer el suelo del balcón).
The Top Section (La Sección Superior): Add a smaller Box on the very top to finish the tower's structure. (Añade un cubo más pequeño arriba del todo para terminar la estructura).
Windows (Ventanas): Create small "Hole" Boxes and place them vertically along the tower to simulate the windows. (Crea cubos huecos pequeños y colócalos verticalmente para simular las ventanas).
Color: Use "Dark Red" or "Brown" to match the brickwork. (Usa rojo oscuro o marrón para imitar el color del ladrillo).
🇩🇰 Challenge: The Liberty Monument (Copenhague)
🇩🇰 Challenge: The Liberty Monument (Copenhague)
🇪🇸 🇬🇧
Description: The Frihedsstøtten is an obelisk erected to commemorate the abolition of serfdom in Denmark. It is located near the Central Station in Copenhagen.
📐 Design Instructions (Instrucciones de diseño):
📐 Design Instructions (Instrucciones de diseño):
The Base (La Base): Create 3 levels using flat Boxes. Each level must be smaller than the one below. (Crea 3 niveles usando cubos aplanados. Cada nivel debe ser más pequeño que el inferior).
The Obelisk (El Obelisco): Place a Pyramid on top and stretch its height. Use the Align tool to center it perfectly. (Coloca una pirámide encima y estira su altura. Usa la herramienta Alinear para centrarla).
The Statues (Las Estatuas): Place 4 small Cylinders on the corners of the base to represent the four statues (Fidelity, Bravery, Civic Virtue, and Diligence). (Coloca 4 cilindros pequeños en las esquinas para representar las estatuas).
Color: Use a light grey or "Sand" color to match the original sandstone. (Usa un color gris claro o arena para que coincida con la piedra original).
Page updated
Report abuse