1) Create Slider Block Drawing by starting a new drawing and drawing the slider block (below) on your own. Units are measured in inches and degrees.
HINTS: Remember to start the bottom left corner of the slider block at (0,0). Also recall, that angles must be input into AutoCAD as measured from the positive x-axis (a right angle is 90 degrees and a straight line is 180 degrees).
Adapted from "Slider Block." Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2022" by Randy H. Shih, SDC Publications 2021 p. 79.
2) Use the "text" command to write your name and date below the drawing
3) Save drawing as "2.07 Your First and Last Name.dwg" to your Drafting 1 Folder
***Don't forget to save work every 5 minutes while working***
4) Submit your completed .dwg file by uploading to assignment Module 2 Portfolio Project in Educator
Slider Block Grading Rubric
Completeness: /10 (Correct Form - Full shape completed)
/10 (Drawing Titled - .dwg file has appropriate name)
Drawing Accuracy: /10 (Straight Lines - correct lengths and positions)
/30 (Angled Lines - correct lengths and positions)
/20 (Large Circle - correct center and area)
/20 (Small Circle - correct center and area)
Total: /100